Summary of DIC-5430DV
Page 1
Distributed by.
Page 2: Ir Vandal Dome Camera
2 super wide dynamic range ir vandal dome camera 사용 설명서 용 서 dic-5430dv manual.
Page 3
3 the lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point wi...
Page 4
4 our wdr ir camera is a superb wide dynamic range camera which achieves 120db max(102db typical) of dynamic range of the image by implementing pixim's seawolf digital imaging system. With seawolf digital imaging system, - delivers high-resolution, crystal clear images that accurately capture every ...
Page 5
5 1) cable connection ( dc12v type ) (dual type dc12/ac24v) 2) osd control ② setup button : used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. ③ up & down buttons : used for selecting items by moving the cur...
Page 6
6 1) in the menu use ▲, ▼ buttons to move menu, ◀, ▶ buttons to change the settings and press button shortly to select or enter. Button stands for menu or enter button. 2) entering menu press button longer than 2 sec on the back of camera. 3) main follow below chart for submenu setting. 3. Setup men...
Page 7
7 4) exposure to enter exposure menu, press button at main>exposure. Exposure descriptions medium level of the dynamic range control for each presets. Wdr high increases the dynamic range control. Some highlight area may washed out. Custom... Provides more flexible compensation other than wdr mid, w...
Page 8
8 5) day/night to enter exposure menu, press button at main>day/night>auto... Important!!! Day->night and night->day operations must be examined and verified at the final step of the installation. Block the lens for a few seconds for night mode and release and let it return to day mode. If camera st...
Page 9
9 6) 3d nr to enter exposure menu, press button at main>3d nr 7) lens select to enter exposure menu, press button at main>lens select>dc... Or manual... 8) picture control to enter exposure menu, press button at main>picture control. 3d nr default descriptions depth 47 determines the depth of three ...
Page 10
10 9) special picture control factory default descriptions white balance atw normal sets atw normal, atw desat, atw xtnd or manual. Atw normal – compensates automatically in range of 2800k-7500k. Atw desat – compensates automatically in range of 2000k-11000k. In the range of 2000-2800k and 7500-1100...
Page 11
11 ① motion up to 4 motion areas and the sensitivity can be set. The sensitivity is applied for all zones equally. In adjusting each zone, the zone border line changes color when pressing button. Green enables enlarging, red enables reducing and white enables moving the zone by ▼, ▲, ▲, ▼buttons. To...
Page 12
12 up to 6privacy area can be programmed in size, position and mask color. Use joystick to change size, position and mask color. Press button longer than 2 sec. To return to previous menu. 10) d-effect right after pressing button at ,on..>, the 1st zone appears on top-left corner in orange. The oran...
Page 13
13 11) exit d-effect default descriptions freeze off image freezes and shows the still image at the moment when set to on.. Flip off off(normal display), h-flip(left & right flipped), v-flip(upside down flipped), h/v-flip(left & right flipped and upside down flipped.) direction of joystick control s...
Page 14
14 if there are problems in operation, please refer to the items below. If the problem persists, please contact the agent you purchased this product from . Problems troubleshooting nothing appears on the screen. • please check the power connection. • please check the video signal line connection. • ...
Page 15
15 5. Dimensions.
Page 16
16 model name ntsc pal image device 1/3" cmy color dps sensor (pixim seawolf d8800c series) effective pixels 768(h) x 540(v) tv system ntsc, 525lines / 2:1interlace pal, 625lines / 2:1interlace scan frequency. 59.94hz(v), 15.734khz(h) 50hz(v), 15.625khz(h) synchronization internal/line lock (default...