1. DL manuals
  2. D-MAX
  3. Security Camera
  4. DMC-20SEC
  5. User Manual

D-MAX DMC-20SEC User Manual

Manual is about: 2Megapixel HD-SDI Speed Dome Camera

Summary of DMC-20SEC

  • Page 1

    2megapixel hd-sdi speed dome camera user manual version d0704 dmc-20sec.

  • Page 2

    2mega hd-sdi speed dome camera user manual 2 content 1. Caution.................................................................................................................................................................................................. 3 2. Product introduction ...................

  • Page 3

    2mega hd-sdi speed dome camera user manual 3 1. Caution thank you for purchasing our product. Please operate the product after being fully aware of the manual. Pease contact us if you have any query. Precaution note the following matters before the installation of the product. Avoid the following pl...

  • Page 4

    2mega hd-sdi speed dome camera user manual 4 caution in use do not disassemble the unit and put alien substances in the unit. Disassembling the unit or putting alien substances such as a metal can make the camera defective. - make sure of power switch-off before the installation. : ensure power swit...

  • Page 5

    2mega hd-sdi speed dome camera user manual 5 2. Product introduction 2.1. Description and features this camera, 2 megapixel full hd-sdi speed dome camera, has been designed elegantly for buildings, department stores that need to be in harmony with the interior as a high speed dome camera, including ...

  • Page 6

    2mega hd-sdi speed dome camera user manual 6 2.2. Product package the following items are included in the product package. Mega speed dome camera 1 pcs wall mount bracket 1 pcs power supply (power cable & linear ac24v/2.5a adapter) 1 pcs bracket blank rubber 2 pcs.

  • Page 7

    2mega hd-sdi speed dome camera user manual 7 2.3. Name and function of each part - exterior - no name function ① wall mount bracket attached wall bracket on the wall ② camera housing outdoor ptz housing. - when the product is released, outdoor housing and indoor housing are united, when the user ins...

  • Page 8

    2mega hd-sdi speed dome camera user manual 8 - interior - system base no name function ① 26-pin d-sub port (male) terminal board connect port ② dip switch (1~8) dip switch (1~4) : address setting switch : set-up setting switch ② ①.

  • Page 9

    2mega hd-sdi speed dome camera user manual 9 connect cover inside no name function ① power port ac 24v / 2.5a power input ② power led turn on the light when its power on ③ hd-sdi port hd-sdi video output (1080p 25/30 fps output) ④ 26 pin d-sub port (female) ptz camera connector ⑤ communication, alar...

  • Page 10

    2mega hd-sdi speed dome camera user manual 10 2.4. Installation 1. Installing wall mount bracket ① loosen 4 bolts of cover and 3 bolts of camera body from camera housing (not loosen the bolts completely) ② put cables (power, video, data) in the bracket and fasten bracket on the wall by 4 bolts then ...

  • Page 11

    2mega hd-sdi speed dome camera user manual 11 ⑥ connect d-sub part and camera dome drive with triangle mark of housing as picture. ⑤ open housing connecting cover and connect power, data, video cables ⑦ connect to clear bubble ③ when the camera is installed retaining wall or concrete building, put t...

  • Page 12

    2mega hd-sdi speed dome camera user manual 12 2. Installing ceiling mount bracket ① loosen 4 bolts of cover and 3 bolts of camera body from camera housing (not loosen the bubble cover bolts completely) ② attach pole box on the ceiling ③ tighten ceiling pole to pole box ④ tighten joint couple ⑤ tight...

  • Page 13

    2mega hd-sdi speed dome camera user manual 13 ⑥ connect to data, video and power ⑦ recombine housing and dome drive. Housing, connect d-sub part and camera dome drive with triangle mark of housing as picture. ⑧ connect to the clear bubble.

  • Page 14

    2mega hd-sdi speed dome camera user manual 14 3. Using speed dome junction box (dsc-30ewb) - speed dome junction box installation - fasten screw up 4 screws of the junction box in order of camera housing → wall mount bracket → water-proof cover → speed dome junction box → wall junction box connectio...

  • Page 15

    2mega hd-sdi speed dome camera user manual 15 for connecting cables in the junction box, please refer to wall mount bracket installation part the ptz junction box inside part is as below. ※ please refer to the speed dome junction box user manual. Ac 24v power supply ac 24v input port ac 24v output p...

  • Page 16

    2mega hd-sdi speed dome camera user manual 16 3. Dip switch setting 3.1. Dip switch setting -termination resistor (dip s2/sw1) -turn the last camera on the data line as a switch to turn on/off the terminal resistor on. Turn the dip sw of some of the farthest cameras on in the case of the data lines ...

  • Page 17

    2mega hd-sdi speed dome camera user manual 17 3.2. Protocol setting set up the switch the switch for select protocol the switch for select baud rates change s2 to init if user wants to change protocol ① please the power off ② switch protocol that user wants to change on in the above the table ③ the ...

  • Page 18

    2mega hd-sdi speed dome camera user manual 18 3.3. Address dip switch setting address is set no 1 ~ 255 by dip switch 1~8. Rx no dip switch (hex) rx no dip switch (hex) 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 on off off off off off off 33 on off off off off on off 2 off on off off off off off 34 off on off of...

  • Page 19

    2mega hd-sdi speed dome camera user manual 19 3.4. Osd menu setting 3.4.1. Osd menu control ■ osd (on screen display) menu control it is the function to call up the menu of the camera. ◈ user can not only set preset, group, tour, swing, trace functions of the camera up by the menu, but also set them...

  • Page 20

    2mega hd-sdi speed dome camera user manual 20 3.4.2. Menu function ■ osd menu tree main menu sub menu 1 sub menu 2 dome driver set set ptz function select preset preset id set preset ptz set swing set group set ch:01~12 tour set trace set previous menu page run function n/a set privacy manual p/t sp...

  • Page 21

    2mega hd-sdi speed dome camera user manual 21 - dome driver set. : set pan, tilt or various surveillance functions. - camera set. : set video, screen display functions. - special set. : set motion detection, alarm, multi-language, password, factory default - exit. : out of osd menu ■ dome driver set...

  • Page 22

    2mega hd-sdi speed dome camera user manual 22 user can select id letter or icon by using joystick up/down/right/left. Shift letter digit by "zoom to save designated id, please pressing "f/f" key, no to save id, please press "f/n" key, it doesn ’t save id and back to previous setting.. 3). Preset ptz...

  • Page 23

    2mega hd-sdi speed dome camera user manual 23 : moves menu : changes setting 1. Pan/tilt swing tilt – move up and down. Pan – move left and right. 2. Start preset set start preset point in swing. 3. End preset set end preset point in swing. 4. Swing time set duration time between swing movement .(1~...

  • Page 24

    2mega hd-sdi speed dome camera user manual 24 [p] peset : enter preset no (save preset no) [s] speed : set movement speed (1~64) 1 [t] time : set duration time (1~127 sec) move next menu move previous menu change setting 6). Tour set tour is included 12 groups. 7). Trace set save joystick pattern mo...

  • Page 25

    2mega hd-sdi speed dome camera user manual 25 ■ trace set ① "7. Tour set" ② press f/n button to select “set” mode → move camera by using joystick toward position you want up to for 180/sec ③ after finishing all work, move cursor to save mode → press f/n button to save joystick movement • [set] : sta...

  • Page 26

    2mega hd-sdi speed dome camera user manual 26 ■ setting - dome drive set → set privacy → enter privacy zone set mode move joystick up / down at desired channel then display black box in the middle of screen by pressing “f/f” key. - move camera position where you want to hide - select privacy zone si...

  • Page 27

    2mega hd-sdi speed dome camera user manual 27 4. Manual p/t speed user can control the maximum speed in controlling of up and down; the mode is low, medium, max 5. Auto tilt move the pan is turned in a 180° degree arc automatically when the angle of the camera moves down to the maximum degree, there...

  • Page 28

    2mega hd-sdi speed dome camera user manual 28 2. H-v reverse set up h-v reverse mode. . ● normal ● h-rev : flip the picture horizontally on the screen. ● v-rev : flip the picture vertically on the screen. ● hv-rev : flip the picture horizontally and vertically on the screen. 3. Agc control agc(autom...

  • Page 29

    2mega hd-sdi speed dome camera user manual 29 7. Dnr level reduce noise of minimum illumination and also file size becomes smaller while dvr is being recorded by the effective reduction of noise. ▶ off, low, middle, max ◈ cf. Not available under agc off 8. Next menu page. ▶ go to next menu page. 9. ...

  • Page 30

    2mega hd-sdi speed dome camera user manual 30 14. Back light mode it provides clear images of object and back ground against a severe back light. ▶ off : disables the backlight ▶ wdr : activates back light. Compensate ▶hlc(high light compensation) : activates high light back light compensate ▶ blc :...

  • Page 31

    2mega hd-sdi speed dome camera user manual 31 ② it is enables to move blc area, reduce blc area and enlarge blc area by joystick zoom in/out 15. White balance the white balance menus adjusts the balance of the screen colors under differnet lighting condition. ▶ auto, indoor, outdoor 16. Day&night th...

  • Page 32

    2mega hd-sdi speed dome camera user manual 32 ■ special set 1. Osd display display id or status in the screen ● id + status: display ‘id’ & ‘status’ only ● id only: display only ‘id’ ● status only: display ‘status’ only ● all off: none display 2. Select alarm enable to select alarm sensor type. ▶ se...

  • Page 33

    2mega hd-sdi speed dome camera user manual 33 ■ set up motion detection ① "2. Select alarm". Select “motion”. ② "3. Motion detection" select "on" change to screen for motion detection area set mode by pressing f/f key. ③ set motion detection area by joystick and adjust motion detection area size by ...

  • Page 34

    2mega hd-sdi speed dome camera user manual 34 - alarm ch on/off : alarm input – each channel can be on/off. - according to signal connection, user can select active open(n/c) or active close(n/o). - if the user selects active open, it is activated when alarm input is open, if the user selects active...

  • Page 35

    2mega hd-sdi speed dome camera user manual 35 ■ home position time it sets the dwell time in home position preset. It automatically moves to where observes ordinarily in the regular time that master user set in observation of other area, if set home position preset. (you can set 1~180sec. Set contro...

  • Page 36

    2mega hd-sdi speed dome camera user manual 36 ■ short cut key menu function operation function operation group 1 51 + preset run trace 66 + preset group 2~11 52 ~61 + preset run spiral 67 + preset group 12 62 + preset b/w mode 68 + preset run tour 63 + preset color mode 69 + preset run pan swing 64 ...

  • Page 37

    2mega hd-sdi speed dome camera user manual 37 13. Change password - "13. Change password" the user can select password by joystick left / right. - initial password is “0000”, new password is designated by joystick up/down/left/right - f/f key : it saves the password and back to previous menu - f/n k...

  • Page 38

    2mega hd-sdi speed dome camera user manual 38 ④ all preset movement press button for 3 sec then beep sound, it follows the steps as below 2. Swing setting ① swing set ② swing execute ③ swing stop (pan execute) (tilt execute) 3. Group setting ① start group setting mode to set more preset, enter prese...

  • Page 39

    2mega hd-sdi speed dome camera user manual 39 ② group execute ③ group stop 4. Tour setting ① tour set mode ② tour execute/stop ③ tour remove (holding 3 seconds ~).

  • Page 40

    2mega hd-sdi speed dome camera user manual 40 5. Spiral function it is a function to observe objects automatically in the spiral direction. Spiral on ② spiral off * 26. “67+preset key” is also available in shortcut key ‘on’ mode 6. Ptz trace it memorizes p/t/z motions for 200sec then operates them a...

  • Page 41

    2mega hd-sdi speed dome camera user manual 41 3.4.4. Osd message description 1. Preset message 2. Swing message 3. Group message cam-001 save preset:001 cam-001 preset:001 cam-001 clear preset:001 display swing execute in the screen. Cam-001 set gp:01 p001,t001,s64, cnt01 as the message in the time ...

  • Page 42

    2mega hd-sdi speed dome camera user manual 42 4. Tour message 5. Spiral message cam-001 set tour gp:01 cam-001 clear tour&group. It shows the data in group and tour saved was deleted. As the message in the time of operation of tour set, “gp:01” means group no.1 and it shows that group no.1 was saved...

  • Page 43

    2mega hd-sdi speed dome camera user manual 43 4. Trouble shooting caution in use • make sure that turn the power switch off before installation. • avoid the places where is the high/low temperature and humid. • power supply must be min ac24v/1a for indoor (dms-200) and min ac24v/1.5a for oudoor (dms...

  • Page 44

    2mega hd-sdi speed dome camera user manual 44 5. Dimension unit : mm.

  • Page 45

    2mega hd-sdi speed dome camera user manual 45 6. Configuration diagram ■ usage • camera + monitor + controller • camera + dvr + monitor • camera + dvr + monitor + controller (control camera osd by dvr).

  • Page 46

    2mega hd-sdi speed dome camera user manual 46 ■ hd-sdi repeater • using 1pcs repeater • using 2pcs repeater • using 4pcs repeater.

  • Page 47

    2mega hd-sdi speed dome camera user manual 47 7. Specification model dmc-20sec image sensor 1/4 ” 2mega panasonic cmos scan mode progressive scan number of active pixels 1944(h) × 1092 (v) = 2,122,848 (pixels) total number of pixels 2010(h) × 1108 (v) = 2,227,080 (pixels) minimum illumination color:...