D.T. Systems, inc. Beeper collar & remote controlled beeper collar owner’s manual btb 800 baritone beeper btb 809 remote controlled model.
2 table of contents • introduction..........................................3 • product overview ................................3 • features ................................................4 • package contents .................................4 • btb 800 parts & functions.................4 • btb 80...
3 thank you for choosing a d.T. Systems beeper collar! The btb 800 and btb 809 give you the ability to keep track of your dog’s location when he is out of sight and lets you know when he has gone on point. This allows you to find the dog quickly and prevents you from making the mistake of calling th...
4 • easy operation - one touch push button system. • long range audibility - audio booster element. • reliability - state-of-the-art microcomputer technology. • two operating modes - run/point, or point only. • rechargeable batteries - charger included. • remote control activation - (btb 809 only) 2...
5 btb 800 operation turning the unit on: to turn the btb 800 on, depress the power and mode selector switch for approximately two seconds. (when you press the switch the led indicator will light for two seconds. As soon as the light goes out you may let go of the switch). The unit is now on. The led...
6 btb 809 operation btb 809 parts & functions turning the unit on: to turn the btb 809 on, depress the power and mode selector switch for approximately two seconds. (when you press the switch the led indicator will light for two seconds. As soon as the light goes out you may let go of the switch). T...
7 the btb 809 has two operating modes. Run/point and point only. When the unit is first turned on it is automatically set to run/point mode. To switch to point only mode quickly depress the power and mode selector switch (less than one second). The led indicator light will blink once and then resume...
8 changing the remote battery (btb 809) 1. Unscrew the small screw on the back of the remote control unit. 2. Replace both 3 volt watch style batteries as shown below. Note: watch “+” “-” while installing. If battery is installed backward it may cause the unit to operate in vibration mode only. Trou...
9 troubleshooting q & a cont. 4. Q : my transmitter led lights when any button on the transmitter is pushed, and the collar led is blinking (indicating the unit is on), but the unit is not working. A: the transmitter and collar frequencies are not in synch. Try the following procedure to restore... ...
10 getting your dog accustomed to the sound • turn on the collar and leave it outside the dog’s kennel area for about a half an hour. Make sure you leave the mode set at run/point and do not change the mode to point only. • repeat this several times, until you can see that the dog is disregarding th...
11 warranty all btbbeeper collars have a one year parts and labor warranty, effective from the original date of purchase. (a copy of the original sales receipt is required to validate the date of purchase). Note btb 809 remote control batteries are replaceable/ disposable and are not covered under t...
12 d.T. Systems, inc. 2872 walnut hill lane dallas, texas 75229 tel: (214) 350-9446, (888) luv-u-dog fax: (214) 350-7847 website: http://www.Dtsystems.Com e-mail: customerservice@dtsystems.Com.
