2.4ghz digital wireless microphone system user guide.
Description docking station (receiver) transmitter green led: in-use (record) red led: charging green led: fully charged terminal for charging antenna connector audio out cable rec button (trigger 1) lapel mic. Cover emg button (trigger 2) green: in-use (light on) rec button on (flashing) rec button...
1. Quick set up and operation synching up the transmitter and receiver the synch operation only needs to be performed the first time a system is used, or a new transmitter is used with a receiver previously synched to another transmitter. Do not perform the synch operation multiple times; it only ne...
2. Installation pin description of the receiver output port connector wire (rj45) pin #1 : transmitter audio out pin #2 : pin #3 : 12v dc_in pin #4 : ground pin #5 : rec trigger out pin #6 : pin #7 : emg trigger out pin #8 : cable description (connect these cable to the brx dvr) 1. Connect audio out...
3. Guidelines and recommendations for best performance compatibility the transmitter and receiver must synchronize to work together (see synch process on page 3). The synch operation only needs to be performed the first time a system is used, or when a new receiver is used with a receiver previously...
4. Technical specifications receiver base station controls video trigger active +12/gnd indicators inuse led: green charge led : charging -> red full charged -> green record led green flashing connections in car mic. 2.5mm mono plug un-terminated cord red +12v dc power blue record trigger out (recor...
5. Trouble shooting guide problem possible causes solutions no audio and no in-use led light on the receiver when transmitter is on and in-use receiver is not powered make sure that the power supply is properly connected transmitter and receiver not synchronized turn on transmitter and place in rech...
