D3 Media 4x4pro Installation Manual

Summary of 4x4pro

  • Page 1

    D3technologies 4x4pro vfc installation guide.

  • Page 2: D3 Technologies Vfc Cards

    D3 technologies vfc cards d3’s user replaceable vfc cards enable users to drive up to 16hd outputs as dvi or sdi (1080p), or 4x4k dp1.2 from a single d3 4x4pro system. Large multi-projector shows can be delivered with fewer machines, no downstream splitters, and practically no signal latency. Vfc ou...

  • Page 3: Changing Vfc Cards

    D3technologies.Com 2 changing vfc cards red lines indicate screw location. Example shows dp1.2 vfc cards please note: take steps to ensure you are free of static electricity before starting the procedure and ground yourself appropriately. We recommend the use of an anti static wrist strap as well as...

  • Page 4: Changing Vfc Cards

    3 d3technologies.Com changing vfc cards step 3: lift the latch on the top right corner of the card and gentlly remove the card from the rear of the unit by pulling gently as shown in the images below. Please note: the vfc cards are fragile, be sure to pull straight not flexing the card and if under ...

  • Page 5: Changing Vfc Cards

    4 d3technologies.Com step 4: gently place the removed card into the anti static box provided with your purchase. Step 5: gently insert the new vfc card into the vacant slot, being careful to line the card up with the black plastic guides both at the top and the bottom of the system, as indicated for...

  • Page 6: Changing Vfc Cards

    5 d3technologies.Com changing vfc cards step 5: once inserted into the guides make sure the card is fully flush with the rear of the server by gently and firmly pressing in the centre of the vfc card, as indicated in the image below. Step 6: replace the four retaining screws before repeating steps 1...

  • Page 7: General Information

    6 d3technologies.Com vfc cards are currently only available for the d3 4x4pro. Should you have questions or issues with this product, contact d3 technologies’ support department for assistance. Only certified technicians should attempt to repair components. Do not try to force the cards if they do n...

  • Page 8: Support

    7 d3technologies.Com support helpful contacts support team support@d3technologies.Com training team training@d3technologies.Com sales team sales@d3technologies.Com helpful resources hardware manual pro.D3technologies.Com user guide r12.D3technologies.Com video tutorials tutorials.D3technologies.Com ...