1. DL manuals
  2. Da-Lite
  3. Projection Screen
  4. Cinema Contour Screen
  5. Instruction Book

Da-Lite Cinema Contour Screen Instruction Book

Other manuals for Cinema Contour Screen: Instruction Book

Summary of Cinema Contour Screen

  • Page 1

    Da-lite screen company, inc. 3100 north detroit street post office box 137 warsaw, indiana 46581-0137 phone: 574-267-8101 800-622-3737 fax: 574-267-7804 toll free fax: 877-325-4832 www.Da-lite.Com e-mail: info@da-lite.Com power presentation products the in instruction book for cinema contour ® scree...

  • Page 2

    1 1. Unwrap the frame pieces. Assemble frame pieces on padding material or other soft, clean surface. This will help keep the frame clean and protect it from scratches. 2. Slide the frame pieces together at corners (note: frame assembly holes may not appear to fit properly at the corners until all f...

  • Page 3

    2 2. To install the lower wall bracket, you must measure the overall height of the screen frame and subtract 1-3/8". Using that dimension, measure down from the top edge of the wall bracket and mark the wall for two screw holes. The holes should be centered within the frame and 6" apart. Refer to fi...

  • Page 4

    3 1. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will need at least 5/8" clearance above the bracket to hang the screen. Figure 5 and 6 show the proper orientation f...

  • Page 5

    4 method 4 (high power ® ) 1. Secure the large wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will need at least 5/8" clearance above the bracket to hang the screen. See figure 8....

  • Page 6

    5 printed in u.S.A. 87070 rev. 1/08.