Da-Lite Da-Snap 74610 Instruction Book

Summary of Da-Snap 74610

  • Page 1

    Power presentation products the in instruction book for da-snap screen da-lite screen company, inc. 3100 north detroit street post office box 137 warsaw, indiana 46581-0137 phone: 574/267-8101 800-622-3737 fax: 574/267-7804 http:// www.Da-lite.Com e-mail: info@da-lite.Com.

  • Page 2

    1 wall bracket quantities vary by screen size screens smaller than 80" viewing width = 1 screens 80" to 96" viewing width = 2 quantity included __________ screens over 96" viewing width = 3 installation screws not included lower wall bracket quantity of 1. Only for screens smaller than 80" viewing w...

  • Page 3

    2 1. Unpack the frame parts from the carton. Do not unroll the screen surface at this time. 2. Take care to observe the color code on the parts. Assemble the top and bottom frame members on the left and right sides using the #10 black screws and snap studs. See figure 1. Frame assembly figure 1. Rea...

  • Page 4

    3 method 2 1. Use the supplied #10 screws to attach four frame brackets to the back of the frame as shown in figure 5. 2. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You...

  • Page 5

    4 installation 5. Unroll the screen on a clean surface. Do not use newspaper. The viewing side is rolled to the inside of the roll. Place the frame over the screen surface, and while lifting the frame with one hand, snap the screen surface onto the frame with the other hand while maintaining a stead...

  • Page 6

    5 printed in u.S.A. 75135 rev. 1/03.