Da-lite screen company, inc. 3100 north detroit street post office box 137 warsaw, indiana 46581-0137 phone: 574-267-8101 800-622-3737 fax: 574-267-7804 www.Da-lite.Com e-mail: info@da-lite.Com power presentation products the in instruction book for da-snap screen.
1 1. Unpack the frame parts from the carton. Do not unroll the screen surface at this time. 2. Slide the frame pieces together at corners. (note: frame assembly holes may not appear to fit properly at the corners until all fasteners have been attached. Once fasteners are attached, the frame corners ...
2 there are four methods of installation based on the size of the screen and type of viewing surface. Measure the width of the viewing area of your screen and refer to the appropriate method of installation below. The wall bracket diagram shows the type and quantity of bracket that is supplied based...
3 1. Use the supplied #10 screws to attach four frame brackets to the back of the frame as shown in figure 5. 2. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will nee...
4 1. Use the supplied #10 screws to attach six frame brackets to the back of the frame as shown in figure 8. 2. Secure the wall brackets to wall studs at the desired height. Make sure the brackets are level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will n...
5 printed in u.S.A. 75135 rev. 5/07 cleaning da-tex, dual vision, pearlescent, cinema vision, high power, da-mat, high contrast da-mat, audio vision, high contrast audio vision, high contrast cinema vision and high contrast cinema perf surfaces can be cleaned as follows: using a white clean cloth (1...
