Instruction book for da-snap screen.
2 1. Unpack the frame parts from the carton. Do not unroll the screen surface at this time. 2. Slide the frame pieces together at corners. ( note: frame assembly holes may not appear to fit properly at the corners until all fasteners have been attached. Once fasteners are attached, the frame corners...
3 there are four methods of installation based on the size of the screen and type of viewing surface. Measure the width of the viewing area of your screen and refer to the appropriate method of installation below. The wall bracket diagram shows the type and quantity of bracket that is supplied based...
4 method 2 (screens over 80" up to 96" in viewing width) 1. Use the supplied #10 screws to attach four frame brackets to the back of the frame as shown in figure 5. 2. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above...
5 method 3 (screens over 96" in viewing width) method 4 (high power® fabric) cleaning 1. Use the supplied #10 screws to attach six frame brackets to the back of the frame as shown in figure 8. 2. Secure the wall brackets to wall studs at the desired height. Make sure the brackets are level. The top ...
6.
7.
Limited one year warranty on da-lite presentation products milestone av technologies llc warrants certain da-lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; pr...
