Instruction book for designer da-tab electrol ®.
2 important safety instructions when using your video equipment, basic safety precautions should always be followed, including the following: 1. Read and understand all instructions before using. 2. Position the cord so that it will not be tripped over, pulled, or contact hot surfaces. 3. If an exte...
3 before proceeding with the installation of the screen, please read the installation and operations instructions thoroughly! Caution! Do not cut wrapping paper or tape with knife or any sharp tool. Remove by hand. Attention! Ne coupez pas le papier d'emballage ou le ruban adhésif avec un couteau ou...
4 designer da-tab electrol ® installation 1. Hang screen from wall or ceiling. For wall mounting hardware provided 2 – “v” bars ( one is factory mounted to the back of the case; one will be mounted to the wall) 6 – toggle bolts, 4" 6 – lead shields, #10-14 x 1-1⁄ 2" 6 – phillips flat head wood screw...
5 screen travel is stopped automatically in the down and up positions by the limit switches that are preset at the factory. If it's necessary to adjust for more or less drop follow the steps below. The case cover must be removed to access the motor limit switches. Remove the front cover of the scree...
6 troubleshooting visit www.Da-lite.Com to find installation and troubleshooting tutorials. You will also find a link to live chat for interactive support and you can contact us by email at info@da-lite.Com or by phone at (800) 622-3737 or (574) 267-8101 with any troubleshooting questions. Symptom c...
7.
Limited one year warranty on da-lite presentation products milestone av technologies llc warrants certain da-lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; pr...
