Instruction book for parallax ™ screen.
2 tools required for installation included hardware phillips screwdriver tape measure pencil large wall bracket (47" long) installation screws not included quantities vary by screen size: screens 80" and smaller viewing width = 1 screens over 80" to 96" viewing width = 2 screens over 96" viewing wid...
3 material handling guidelines caution: handle screen surface with care. Ambient light rejecting screen surfaces are delicate and should remain flat at all times. • carefully and evenly unroll screen surface to ensure flatness. • do not fold, stretch or crease screen surface. • do not allow objects ...
4 1. Unpack screen surface. Caution: handle screen surface with care. See material handling guidelines. 2. Locate the top of the screen surface. "top" will be labeled and should be matched with the "top" of the frame. Surface attachment 3. Remove foam and unroll screen surface evenly on the back of ...
5 surface attachment (continued) 5. Repeat step 4 for the remaining three corners of the screen. Use the sequence shown in figure 4. 6. Insert one elastic ring into the center hole on the right, left, top and bottom of the screen surface and secure it over the stud. Use the sequence shown in figure ...
6 installation method 1 (screens 80" and smaller in viewing width) 1. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will need at least 5/8" clearance above the bracket...
7 installation method 2 (screens over 80" up to 96" in viewing width) 1. Secure the wall bracket to wall studs at the desired height. Make sure the bracket is level. The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will need at least 5/8" clearance above the brac...
Limited one year warranty on da-lite presentation products milestone av technologies llc warrants certain da-lite branded products to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser; pr...
