1. DL manuals
  2. Da-Lite
  3. Control Unit
  4. SCB-100
  5. Installation And Operating Instructions

Da-Lite SCB-100 Installation And Operating Instructions

Summary of SCB-100

  • Page 1

    Da-lite screen company, inc. 3100 north detroit street post office box 137 warsaw, indiana 46581-0137 phone: 574-267-8101 800-622-3737 fax: 574-267-7804 www.Da-lite.Com e-mail: info@da-lite.Com power presentation products the in installation and operating instructions for serial control board scb-10...

  • Page 2

    Installation this manual covers installation for both the external scb-100 and the built-in scb-100. If you have the external scb -100, refer to diagrams 1, 2 and 3 for wire connections. If your screen has the scb-100 built into the screen case, refer to diagram 4 for wire connections. The main powe...

  • Page 3

    Screen motor the scb-100 has two motor outputs. This allows control of two screens or a screen and a projector lift independently. 1. Connect the motor wires in the screen junction box to the scb-100 as shown in diagram 2. 2. Use 14-18 gauge wire to extend the motor wire to the required length. Powe...

  • Page 4

    Printed in u.S.A. 93489 rev. 11/04 3 rs-232 communications the command protocols are as follows. Screen 1 up: @1u screen 1 stop: @1s screen 1 down: @1d screen 2 up: @2u screen 2 stop: @2s screen 2 down: @2d poll: @p response to a poll is @1x2x where x is u for up, s for stop, d for down. Communicati...