Da-Lite Tensioned Advantage Deluxe Electrol Specification
HDTV FORMAT DIMENSIONS
Viewing Area
Nominal Diagonal
Overall Length of Case
Approx. Ship. Wt.
H x W
Cm
In.
Cm
In.
Cm
Lbs.
Kg
45" x 80"
114 x 203
92"
234
102-3/4"
261
125
56.7
52" x 92"
132 x 234
106"
269
115-1/4"
293
140
63.5
54" x 96"
137 x 244
110"
279
119-3/4"
304
145
65.8
58" x 104"
147 x 264
119"
302
128-1/4"
326
150
68.0
65" x 116"
165 x 295
133"
338
141-1/4"
359
163
73.9
78" x 139"
198 x 353
159"
404
166-1/4"
422
188
85.3
SPECIFICATION DATA
TENSIONED ADVANTAGE
DELUXE ELECTROL
®
Automatic Electric Projection Screen
VIDEO FORMAT DIMENSIONS
Viewing Area
Nominal Diagonal
Overall Length of Case
Approx. Ship. Wt.
H x W
Cm
In.
Cm
In.
Cm
Lbs.
Kg
43" x 57"
109 x 145
72"
183
79-1/4"
201
102
46.3
50" x 67"
127 x 170
84"
213
90-1/4"
229
114
51.7
60" x 80"
152 x 203
100"
254
104-1/4"
265
125
56.7
69" x 92"
175 x 234
120"
305
118-1/4"
300
148
67.1
87" x 116"
221 x 295
150"
381
145-1/4"
369
170
77.1
108" x 144"
274 x 366
180"
457
170-1/4"
432
189
85.7
120" x 160"
305 x 406
200"
508
187-1/4"
476
203
92.1
S
UGGESTED SPECIFICATIONS:
projection screen(s),
(H) x
(W), size. The
Tensioned Advantage Deluxe screen shall have two motors, one to operate door and one to operate screen. Door motor electrically
operated 120 volt (60 Hz) 1.2 amp. Shall have specially designed motor mounted inside the roller, to be three wire with ground, quick
reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting.
To have pre-set but adjustable limit switches to automatically stop fabric door in the ”up“ and ”down“ positions. The roller to be of rigid
aluminum, 1-1/2" in diameter. Screen motor is electrically operated 120 volt (60 Hz) 1.4 amp. Shall have specially designed motor
mounted inside the roller with a noise silencer to be three wire quick reversal type, oiled for life, with automatic thermal overload
cutout, integral gears, capacitor and an electric brake to prevent coasting. To have pre-set but adjustable limit switches to automatically
stop picture surface in the ”up“ and ”down“ positions. The roller to be of rigid metal, 3-3/16" in diameter. Screen fabric to be seamless,
flame retardant and mildew resistant vinyl, with Da-Mat, High Contrast Da-Mat, Audio Vision, High Contrast Audio Vision, Da-Tex (Rear),
Dual Vision, Cinema Vision, High Contrast Cinema Vision, High Contrast Cinema Perf or Pearlescent surface with black masking borders
standard. Each side of the fabric to have tab guide cable system to maintain even lateral tension and hold surface flat. Custom slat bar
with added weight maintains vertical tension on the screen surface. Case shall be an aluminum extrusion. Bottom of case to be self-
trimming with a built-in flange around the bottom of the case. Case to be white. Steel brackets bolted to the ends of case for ceiling
mounting. A section of the bottom of the case shall be an aluminum door equipped with hinges so that it opens and closes
automatically with the lowering and raising of the picture surface. The balance of the bottom of the case shall be a second hinged
aluminum door with manual opening to provide access. Hinges shall be mounted in a concealed way. Junction box shall be integrated
into the housing making it possible to install the housing and wire to the building’s electrical system during construction. The junction
box shall contain a five prong connector that is mounted in the housing for easy plug-in connection to the motorized fabric and roller
assembly. The motorized fabric and roller assembly to be installed in the case at the factory or at a later time at the job site. To be
complete with three position control switch and cover plate. Suitable for use in environmental air space in accordance with section
300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1.
Screen to be listed by Underwriters’ Laboratories.
All viewing surfaces will be seamless.
All viewing surfaces are standard with black backing except Da-Tex and Dual Vision.
Audio Vision, High Contrast Audio Vision and High Contrast Cinema Perf available in sizes up to 87" x 116" in Video Format and 78" x 139" in HDTV
Format.
All screens standard with 12" black drop at top.
Extra drop may alter case dimensions. Contact Da-Lite for details.
Overall case length dimensions ±1/4".
Detail dimensional drawings, wiring diagrams and installation instructions
available upon request.
Specifications subject to change without notice.
Letterbox formats and custom sizes available upon request.
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
www.da-lite.com
e-mail: info@da-lite.com
SQUARE FORMAT DIMENSIONS
Viewing Area
Overall Length of Case
Approx. Ship. Wt.
H x W
Cm
In.
Cm
Lbs.
Kg
50" x 50"
127 x 127
73-1/4"
186
93
42.2
60" x 60"
152 x 152
84-1/4"
214
104
47.2
70" x 70"
178 x 178
95-3/4"
243
116
52.6
84" x 84"
213 x 213
112-1/4"
288
125
56.7
6' x 8'
183 x 244
122-1/4"
311
140
63.5
8' x 8'
244 x 244
125-3/4"
319
148
67.1
7' x 9'
213 x 274
136-1/4"
346
155
70.3
9' x 9'
274 x 274
134-3/4"
342
159
72.1
8' x 10'
244 x 305
149-3/4"
380
165
74.8
10' x 10'
305 x 305
146-3/4"
373
168
76.2
9' x 12'
274 x 366
170-3/4"
434
189
85.7
C