DAAB DB317 User Manual

Summary of DB317

  • Page 1

    Daab box 125 s-284 22 perstorp sweden phone: +46 435 77 95 00 fax: +46 435 77 95 29 e-mail: info@daab.Nu www.Daab.Nu daab unit d5, chaucer business park, kemsing, kent, tn15 6yu england phone: +44 (0)1732 765476 fax: +44 (0)1732 765478 e-mail: sales@daab.Co.Uk radio receivers type db317 and dbr1-m4 ...

  • Page 2

    Contents general specification............................................................................................................................ 2 safety instructions ..............................................................................................................................

  • Page 3

    Description of the transmitters • 2 button transmitter red led - indicates a transmission function buttons battery tray key-ring holder 2no cr2016 3v batteries • 4 button transmitter battery tray key-ring holder red led - indicates a transmission function buttons user manual db317 and dbr1-m4 editio...

  • Page 4

    Description of the receivers • 1 channel receiver • 4 channel receiver status led’s. Lit when active d1-d3 red light d4 green light connector x1 for connection to the control panel ep103 connection terminal for antenna self-teach button sw1 bnc-connector for antenna led d1 shows programming status s...

  • Page 5

    Mounting the receiver and antenna 1 channel receiver (db317) 1. Switch off the electrical supply to the control panel ep103. 2. Gently press the connector on the card to the connector on ep103 panel marked x59. 3. Secure the card with two m3x4screws to the distance pieces on ep103 panel. 4. Connect ...

  • Page 6

    Commissioning transmitters need to be ‘introduced’ to the receiver. Each transmitter has a unique code, this can’t be changed. The receiver ‘learns’ the transmitter code by pressing the self-teach button (sw1) on the receiver. Each setting is confirmed with the led’s on the receiver. Each receiver w...

  • Page 7

    • common for both the receivers erase all the transmitters all the transmitters in the memory can be erased. 1. Press the self-teach button until the led is lit. 2 a. (db317) release the button and press again; the led d1 flashes 3 times. 2 b. (dbr1-m4-1) release the button and press again; led’s d3...

  • Page 8

    Accessories 2 button transmitter, blue art no. 002610 2 button transmitter, grey art no. 002608 2 button transmitter, red art no. 002612 2 button transmitter, burgundy art no. 002609 4 button transmitter, yellow art no. 002611 holder for 4 button transmitter art no. 002663 4 button transmitter for w...