DAAB FAAC C850 User Manual - Manual Release
of
8
7
www.faac.se
Users manual
Operator FAAC C850
Manual release
To release the gear motor, proceed as follows:
1.
Insert the provided key and turn clockwise
2.
Turn the release system clockwise until it reaches the mechanical stop.
3.
Open or close the gate manually.
To lock the gear motor, proceed as follows:
1. Turn the release system anti-clockwise until it stops
2. Then the key anti-clockwise and then remove it from the lock.
3. Move the gate by hand until the clutch is locked again.
Maintenance
We recommend checking system operation every six months, with special attention to the safety devices (including the motor thrust
power, which must comply with the regulations in force) and release devices.
Repairs
For repairs, contact an authorized FAAC Service Centre.