DAB SmartDAB Installation & User Manual - How to Fit -
of
8
How to fit -
PLUG
• Remove all the contents from the SmartDAB box
• Position the antenna in the top right of the front windscreen (top left for right
hand drive cars). The antenna should be located parallel to the A-pillar of
the car (FIG 1). We recommend that it is held in position with a temporary fix
until you confirm that you have a good reception.
• Plug the cigarette lighter charger into the nearest 12v supply to where you
want to locate the Smart box – the red light should illuminate.
• Plug the 3.5mm Jack into the cars aux-in socket.
• Now plug all 3 devices into the Smart box (FIG 2)
• USB port available for phone charging.