Dacia 2014 Logan MCV Driver's Handbook Manual - page 172
Jaune
Noir
Noir texte
5.8
ENG_UD26980_1
Enjoliveurs - Jantes (X52 - Dacia)
ENG_NU_993-5_X52_Dacia_5
WHEEL TRIM - WHEELS
Wheel trim with concealed
wheel bolts
(example: wheel trim
6
)
Remove the wheel trim using the
hubcap tool
2
, by inserting the tool into
valve recess
5
.
To refit it, align it with valve
5
. Push the
retaining hooks in fully, starting with
side
A
near the valve, followed by
B
and
C
, finishing at
D
opposite the valve.
2
A
B
C
D
5
2
3
Central wheel trim with
visible wheel bolts
(example: wheel trim
1
)
The bolts are directly accessible.
Central wheel trim with
concealed wheel bolts
(example: wheel trim
4
)
Remove it using the hubcap tool
2
by
inserting the tool into the recess
3
pro-
vided.
To refit it, turn it so that it is aligned with
the rim and clip it in place.
1
4
6
Never leave tools unsecured in the vehicle: there is a risk that they may be thrown about during braking. After use,
make sure the tools are correctly positioned in their housings: there is a risk of injury.
If wheel bolts are supplied in the tool kit, only use these bolts for the emergency spare wheel: refer to the label affixed
to the emergency spare wheel.
The jack is designed for wheel changing purposes only. Under no circumstances should it be used for carrying out repairs un-
derneath the vehicle or to gain access to the underside of the vehicle.