Dacor AERB30G03 Installation Instructions

Page of 2

Download

Bookmark us

STEP 1: Disconnect the power cord to the range. Turn off the gas at the gas supply

valve.

STEP 2: Slide the range out from the cabinet.

STEP 3: Remove the grates.

STEP 4: Remove and retain the three (3) screws on the front of the existing backguard.

STEP 5: Remove the two (2) top screws on the back of the side panels.

STEP 6: Remove the existing backguard.

Continued on back...

DANGER:

Electric shock and explosion hazard! Before installation,

disconnect the power cord and shut off the gas supply

valve.

Instructions:

Backguard Kits

AERB30G03, AERB30G06, AERB30G09

INSTALLATION

INSTRUCTIONS

RANGE MODEL: ER30G

Part No. 106191 Rev. B

WARNING: Do not disassemble the range until it has cooled.

Backguard Removal

Backguard height varies with kit

1 2 Next › »

Page 1
Step 1: disconnect the power cord to the range. Turn off the gas at the gas supply valve. Step 2: slide the range out from the cabinet. Step 3: remove the grates. Step 4: remove and retain the three (3) screws on the front of the existing backguard. Step 5: remove the two (2) top screws on the back ...
Page 2
Dacor ● 1440 bridge gate drive, diamond bar, ca 91765 ● tel: (800) 793-0093 ● fax: (626) 403-3130 ● www.Dacor.Com step 7: remove the protective plastic cover from the new backguard. Step 8: place the new backguard over the back of the range. The backguard fits over the exhaust duct sticking up on th...