Dacor AVPH1 Installation Instructions
DANGER:
Electric shock and explosion hazard! Before installation,
turn off power at the circuit breaker or fuse box.
Recirculating Kit # AVPH1
INSTALLATION
INSTRUCTIONS
PHW RANGE HOOD SERIES
Part No. 107912 Rev. A
Parts Included
Charcoal Filters (Qty 2)
Top cap (Qty 1)
Tools and Materials Required
The following items are not provided with the kit and are required for proper installation:
Introduction
This kit contains the materials necessary to convert a PHW series
hood to a recirculating configuration in instances where exhausting
the hood outside the building is not practical or desired. The kit
consists of a top cap and 2 charcoal filters. When installed, the top
cap redirects air flow out the vents in the sides of the hood chimney
assembly. The provided charcoal filters are installed underneath the
mesh type filters included with the hood. The charcoal filters reduce
smoke and fumes before the hood exhaust is vented into the room.
•
Sheet metal screws (suitable for attaching
duct work)
•
Duct tape
•
Drill with 1/16” drill bit
•
Tin snips
•
Piece of 8-inch diameter, round metal duct, 18 inches
long (use only solid metal duct)
•
Level
Top cap
Chimney
Duct inside
chimney between
hood and top cap