Dacor DDW24S Use And Care Manual - page 14
12
Operating Your Dishwasher
Various functions and settings on your dishwasher
canbeconfiguredbytheuser.Tochangeoneofthe
settings:
1. Open the door slightly. If the main power switch
ison,turnitoffandwaitaboutfiveseconds.
2. Turn on the main power switch. Wait for the
display to light.
3. Withinfivesecondsofthedisplaylighting,hold
yourfingeronthe
PROGRAM touch key. Wait
forthebeepconfirmingthekeytouch,thentouch
the
Dry key at the same time. Touch both keys
until the
Daily and Rinse and Hold indicator
lightsflash.
Control Panel Settings
Function
Menu #
Settings
Description
Child lock
1
0 (off)/
1 (on)
When the child safety lock is engaged, the control panel touch keys do
notworknormally,makingitmoredifficulttoprogramandstart.See
page 3 for instructions on how to temporarily bypass the child lock.
End beep
volume
2
0 (off) to 4 Changes the volume of the beep used to indicate when a cycle is
finishedorwhenafaulthasoccurred.
Key touch
beep volume
3
0 (off) to 4
Changes the volume of the beep emitted each time a key on the
control panel is touched.
Display
contrast
4
-1 to 3
Adjusts the contrast of the display.
Rinse aid
dispenser
5
0 (off) to 6
Adjusts the amount of rinse aid dispensed during each cycle.
4. While the
Daily and Rinse and Hold lights are
flashing,touch
START/STOP repeatedly until the
menu number for the desired function appears
on the left side of the display.
5. Touch
PROGRAM repeatedly until the desired
setting for the function being set appears on the
right side of the display.
6. Touch
START/STOP repeatedly to save the
setting and exit the menu. Repeat the above
steps to change the settings for a different
function.
Menu #
Rinse and Hold
Daily
Dry
Setting