Dacor DHW301 Installation Instructions
DANGER:
Electric shock and explosion hazard! Before installation,
turn off power at the circuit breaker or fuse box.
Recirculating Kits:
AVDH1, AVDH2
INSTALLATION
INSTRUCTIONS
RANGE HOOD MODELS:
DHW301, DHW361, DHW421 and DHW482
Part No. 107910 Rev. B
Parts Included
Charcoal Filter(s)
AVDH1 (Qty 1)
AVDH2 (Qty 2)
Top cap (Qty 1)
Tools and Materials Required
The following items are not provided with the kit and are required for proper installation:
Introduction
This kit contains the materials necessary to convert a DHW series
hood to a recirculating configuration in instances where exhausting
the hood outside the building is not practical or desired. The kit
consists of a top cap and charcoal filter(s). When installed, the top
cap redirects air flow out the vents in the sides of the hood chimney
assembly. The provided charcoal filter(s) are installed underneath
the baffle type filters included with the hood. The charcoal filter(s)
reduce smoke and fumes before the hood exhaust is vented into the
room.
•
Sheet metal screws (suitable for attaching
duct work)
•
Duct tape
•
Drill with 1/16” drill bit
•
Tin snips
•
Piece of 8-inch diameter, round metal duct, 24 3/4
inches long (use only solid metal duct)
•
Level
Top cap
Chimney
Duct inside
chimney between
hood and top cap