Dacor IHL30 Installation Instructions Manual - page 5
3
Installation Instructions
Installation Planning
The Dacor integrated hood liner (IHL) is constructed of
non-combustible stainless steel. Its dimensions and design
make it an excellent component for any custom hood
structure. Dacor offers two integrated ventilation system
products (IVS1 and IVS2) which conveniently install on the
pre-mounted installation lugs around the opening at the top
of the hood liner.
Compatibility
IHL Model
IVS Model*
IHL30
IVS1 (600 CFM)
IHL36
IVS1 (600 CFM)
IHL42
IVS2 (1200 CFM)
IHL48
IVS2 (1200 CFM)
IHL54
IVS2 (1200 CFM)
* See IVS installation instructions for specifications.
• Plan the installation so that all minimum clearances are
met or exceeded. Dimensions shown provide minimum
clearances, unless otherwise noted.
• Dacor IHLs have no electrical parts.
• #8 mounting screws (not provided) are required to
install the IHL. The length and type must be determined
according to the application (mounting material). See
the diagrams below to determine the quantity required
for the model being installed.
• For proper installation of the complete IHL/IVS custom
hood ventilation system, the installer must follow
the installation information in the IVS Installation
Instructions. Follow all electrical requirements specified
in the IVS Installation Instructions.
• The IVS is attached to the IHL using the 8-32 cap nuts
and lock washers provided with the IHL kit. Quantity
varies according to kit.
• The IHL is designed for vertical on center ducting
applications only.
21"
(53.3 cm)
4" (10.2 cm)
B
Model
IHL42
IHL48
IHL54
(B)
39" (99.1 cm)
45" (114.3 cm)
51" (129.5 cm)
IVS2 mounting
studs (12 places)
IVS2 integrated
ventilation system
IHL mounting hole
(6 places)
13 7/16"
(34.1 cm)
CL
IHL42/48/54 Overall Dimensions - Top View
13 7/16"
(34.1 cm)
21"
(53.3 cm)
4" (10.2 cm)
A
Model
IHL30
IHL36
(A)
27" (68.6 cm)
33" (83.8 cm)
IVS1 mounting
studs (6 places)
IVS1 integrated
ventilation system
IHL mounting hole
(4 places)
CL
IHL30/36 Overall Dimensions - Top View
Assembled Height - IHL30/36 and IVS1
Assembled Height - IHL42/48/54 and IVS2
10" (25.4 cm)
10"
(25.4 cm)
10” (25.4 cm)