Dacor RDW24 Use And Care Manual - page 14
12
Operating Your Dishwasher
Various functions and settings on your dishwasher
canbeconfiguredbytheuser.Tochangeoneofthe
settings:
1. Open the door slightly. If the display is lit, hold
yourfingeronthemainpowerkeyuntilthe
display turns off. After the control panel lights go
out,waitaboutfiveseconds.
2. Holdyourfingeronthemainpowerkeyuntilthe
display lights up again.
3. Withinfivesecondsofthedisplaylighting,touch
the
PROGRAM and Dry keys at the same time.
Keepyourfingersonbothkeysuntilthe
SET
symbol (shown above) appears on the display.
Control Panel Settings
Function
Menu #
Settings
Description
Child lock
1
0 (off) or
1 (on)
When the child safety lock is engaged, the control panel touch keys do
notworknormally,makingitmoredifficulttoprogramandstart.See
page 3 for instructions on how to temporarily bypass the child lock.
End beep
volume
2
0 (off) to 4 Changes the volume of the beep used to indicate when a program is
finishedorwhenafaulthasoccurred.
Touch key
beep volume
3
0 (off) to 4 Changes the volume of the beep emitted each time a touch key on the
control panel is touched.
4
Not used on this model.
Display
contrast
5
-1 to 3
Adjusts the contrast of the display.
Rinse aid
dispenser
6
0 (off) to 6 Adjusts the amount of rinse aid dispensed during each cycle.
4. Touch
START/STOP repeatedly until the menu
number for the desired function appears on the
display (see above).
5. Touch
PROGRAM repeatedly until the desired
setting for the function being set appears on the
display (see above).
6. Touch
START/STOP repeatedly to save the
setting and exit the menu. Repeat the above
steps to change the settings for a different
function.
Menu #
PROGRAM
key
Main power key
Dry key
START/STOP
key
SET symbol
Setting
SET