DAELIM Daystar 250 Owner's Manual - page 66
64
INSPECTION AND MAINTENANCE
Be careful about enough safety at inspection
Select the flat and durable ground at inspection, erect the main
stand then inspect.
After engine stop, because the engine, muffler and exhaust
pipe, and other parts are heated, be careful about burning.
The emission gas includes harmful components like CO.
Do not inspect or start at sealed parking lot or not ventilated
place.
If inspection by driving vehicle, be careful enough about the
traffic situation.
When doing inspection and repair, be careful about
inflammable things, especially be careful near gasoline and
battery.
If tool or equipment for inspection, repair is necessary, please
use the proper ones.
For the safety, do inspection and repair within yourself know-
how and skill.
If you think that a certain inspection or repair is difficult, visit
and consult with the designated service shop.
WARNING
If you do not observe the proper inspection and repair
method, this may occur accident like turn-over, even
happen death or serious damage.
Inspection and repair shall be observed according to
the inspection method written on the user’s manual.
Regarding the abnormal contents, be sure to inspect
and repair before driving.
INSPECTION AND MAINTENANCE