Daewoo 14H1T Instruction Manual - R E C O R D I N G
12
◆
If you have not set the clock, when you press the VideoPlus+(Showview)
button to set timer recording, the set will automatically change to the “CLOCK”
menu.
◆
If you don’t have the VideoPlus+(Showview) numbers see page 11 for the
normal timer.
◆
If you have made a mistake, move back to the relevant position with the C
button and change the setting.
◆
During recording you can switch the screen off by pressing
button.
◆
The screen will indicate if the station is not programmed (page 5~7).
◆
Should programmings overlap, you get a warning.
◆
In the case of error messages, correct the input or check the date and time on
your televideo (also check your TV guide).
◆ For timer recordings, clock, date, and stations must be set correctly (page 5).
◆ Load a cassette with its safety tab in place (see page 13) and with sufficient free
space for the recording.
R E C O R D I N G
c a s s e t t e s
Timer recording using VideoPlus+ (ShowView): (Option)
Call the VideoPlus+
(ShowView) menu.
From your TV magazine, type
in the number next to the
programme you want to
record. (Digit key)
Confirm (
button)
◆ Showview :
FRANCE/CONTINENTAL
◆ VideoPlus+ : U.K. Only
0 - 9
: Digit entry
: Store
CLEAR
: Delete
SV/V+
: Exit
Showview
---------
0 1 / 0 1 / 2 0 0 1 1 3 : 5 7
If you press the
button,
Timer Programme menu will
be displayed.
If you want to change data,
Press
VW
buttons.
Confirm (
button)
VW
: Select
CLEAR: Delete
CB
: Access
: Store
MENU : Previous
Timer programme
No. Pr.
Date Start
End
PDC SP/LP
1
01
05
14:18 17:15
Off
SP
2
---
---
--:--
--:--
Off
SP
3
---
---
--:--
--:---
Off
SP
4
---
---
--:--
--:---
Off
SP
5
---
---
--:--
--:---
Off
SP
6
---
---
--:--
--:---
Off
SP
(Do not use the main power button on the front panel
of the set.) The televideo will switch on and off
automatically to record the timer event.