Daewoo ACP-0106A Servise Manual - 1. Product Specifications

Manual is about: 0106Series/5010Series/ACP-0108 Series

Summary of ACP-0106A

  • Page 1

    Service manual car audio s/m no : acp0108ef0 model : acp-0108 series daewoo electronics co., ltd http://svc.Dwe.Co.Kr mar. 2001 4-channel high power (40w x 4ch) electronic tuning electronic volume/bass/treble/balance/fader control 42 memory capability (18fm+12mw+12lw) local/dx switch loudness & mute...

  • Page 2: Table of Contents

    1. Product specifications ..................................................1 2. Line drawing ........................................................................2 3. Emergency trouble shoot ............................................3 4. Adjustments ...............................................

  • Page 3: 1. Product Specifications

    1 1. Product specifications audio section maximum output power : 40watts per channel into 4 ohms. Load impedance : 4 ohms or 8 ohms total harmonic distortion : less than 10% at 12 watts frequency response : 100hz( + 3db), 10khz(-5 + 3db) control bass/treble : 10 + 3db at 100hz/10khz cd player sectio...

  • Page 4: 2. Line Drawing

    2 2. Line drawing 2-1. Front side 2-2. Rear side acp-0108rds serise - rds function - compact disc player - 4-channel high power (40w x 4ch) - electronic tuning - electronic volume /bass /treble /balance /fader control - 42 memory capability (18fm+12mw+12lw) - local/dx switch - loudness & mute contro...

  • Page 5: 3. Emergency Trouble Shoot

    3 3. Emergency trouble shoot 3-1. General function no sound from speakers yes no yes output connector is missing output connector is inferior goods put exactly output connector in. Change output connector to superior goods yes no power ic, output socket is inferior goods change power ic, output sock...

  • Page 6

    4 emergency trouble shoot 3-2. Tuner function hearing noise only yes no yes no selected the station tuner module is inferior goods. Select exactly broadcasting frequency. Change tuner module to superior goods. Yes weak frequency area caused by elevations change to goods of r.D.S function. Yes a b a ...

  • Page 7

    Emergency trouble shoot 5 disc is not inserted. Yes yes there is disc in the slot take out disc from the slot disc is inferior goods use only superior disc no yes a selection time is longer than unusually yes selected pause function release pause function yes selected mute function release mute func...

  • Page 8: 4. Adjustments

    4. Adjustments 6 4-1. Tuner module adjustment locations cat-7 (3 band) cat-6 (2 band).

  • Page 9

    Adjustments 4-2. Mw / lw adjustment method 7 step mw lw band covering range if 522 khz 522 khz 603 khz v.T point of am board output output 522 khz 450 khz 603 khz amosc maximum 1620 khz 1620 khz - 7.6v maximum maximum amif amrf1 amrf2 1404 khz output 1404 khz maximum amrf1 amrf2 tracking alignment t...

  • Page 10

    Adjustments 4-3. Fm adjustment method 8 step 1 if adjust mpx ic separation control 98.1 mhz, ant input 60dbu, 1khz (30% mod) fm ssg ant jack and gnd ant jack and gnd 98.1 mhz, ant input 40dbu, 1khz (l+r=45% l-r=45% pilot=10% mod) the voltage between cw03 l or r ch sp. Output wire vtvm and scope fm d...

  • Page 11

    Adjustments 9 definition of mechanical mode no 1 2 3 4 stop mode loading mode play mode eject mode - disc haven’t been inserted or disc have been ejected. When disc shall be transported into the unit mechanism shall be fixed at this mode. - loading device can insert disc thru the slot. - floating de...

  • Page 12

    10 no 8 9 10 11 12 13 14 15 16 17 anti-vibrational performance playability disc deflection disc eccentricity jitter frequency response harmonic distortion dynamic range s/n ratio channel + 0.4mm + 0.21mm > 80db at 1khz > 85db at 1khz > 70db at 1khz > 65db at 1khz > 85db at 1khz > 75db at 1khz 20-20k...

  • Page 13

    11 5. Schematic diagrams option rds function cdc function for acp-0108seires.

  • Page 14

    6-1. Pcb main 12 6. Parts location on p.C. Board part side.

  • Page 15

    13 parts location on p.C. Board for acp-0108series bottom side.

  • Page 16

    Parts location on p.C. Board for acp-0108series 14 part side bottom side 6-2. Pcb front.

  • Page 17

    15 7. Overall exploded view & parts list for acp-0108seires.

  • Page 18

    16 8. Deck mechanism exploded view&parts list for acp-0108seires.

  • Page 19

    8-1. Parts list for dcm-200/201 deck mechanism exploded view & parts list for acp-0108 series no part name chassis side total assy chassis side assy lock plate r assy washer cut d4xd2xt0.25 moving plate r assy spg moving plate chassis gear total assy chassis gear assy motor loading gear load motor c...

  • Page 20

    Deck mechanism exploded view & parts list for acp-0108 series 18 no part name gear sled screw slider rack spg sled insert screw machine pan m1.7x3 holder feed motor gear center motor feed gear feed motor screw machine pan m2x5 sw screw machine pan m2x3 plate spg screw tapping pan t2s m2x4 motor spin...

  • Page 21

    No part name gear relay 2 gear relay 1 washer cut d6xd2.6xt0.25 washer cut d4xd1.6xt0.25 roller bush bracket door screw taptite spl m2x3.5 chassis main chassis gear total assy gear double screw taptite pan m2x3.5 sensor pcb assy screw taptite spl m2x3.5 lock plate l assy washer cut d4xd2xt0.25 movin...

  • Page 22: 9. Electrical Parts List

    9-1. Main section caution is a recommendable part for essential stock. R 9. Electrical parts list for acp-0108series 20 cn103 cw101 cw104 c348 ic101 ic204 ic301 ic302 ic501 ic503 j101 ld101 l501 q211,q502 q213 rv101 10001 b001 ct101 ct201 dz101 dz103,dz501 dz105,dz106 q201 dz202 dz502 dz503 dz504 l1...

  • Page 23

    9-2. Front section parts list for acp-0108series 21 q105,q110 q106,q212 q202,q301 q302 q507,q508 q506 tr tzra105m-- tztc3205y- tzdtc323ts tztc3198y- tzta1267y- kra-105m ktc3205y (2236y) dtc323tsa spt krc102m(kec) kta1267y tapping no part name part code description cb001 cb010 cb020 cb030 cb040 cb050...

  • Page 24

    Parts list for acp-0108series 22 11001 cw104 lcd ld402,ld403 pl501,pl502 pl503,pl504 pl505,pl506 pl507,pl508 sw516,sw517 vr401 0f010 0f020 0f030 0f040 11001 b002 sw501,sw502 sw503,sw504 sw505,sw506 sw507,sw508 sw509,sw510 sw511,sw512 sw513,sw514 sw515,sw516 11002 ic401 pcb front as conn detachable l...

  • Page 25

    9-4. Pcb fm 1-chip as section e.Parts list for acp-0108series 23 aif aosc arf01 arf02 arf11 arf21 cr01 fdet fif ic01 ic02 ic03 losc l02 l04 l07 00010 10001 b01 10002 q01 q02 q03,q11 q04,q12 q13,q82 q83,q84 q05 q10 ift am ift osc ift mw rf1 ift mw rf2 ift lw rf2 5105aywa35 5105arda34 5105awha32 5105a...

  • Page 26: 10. Function Of Micom Ic

    10. Function of micom ic 10-1. Pin configuration (top view) 24.

  • Page 27

    Function of micom ic upd178016gc for acp-0108 seriese 10-2. Pin description pin 77 76 22 30 79 22 33 75 71 18 7 8 9 10 12 13 14 19 4 67 11 20 assign p_xin power off low, power on high key & lcd driver ic interface ports. Evr ic interface ports audio mute port, active high beep output port. Detachabl...

  • Page 28

    Function of micom ic upd178016gc for acp-0108 series 26 pin 66 42 3 64 60 57 45 49 48 51 1 assign p_wled warning led output port. Out put condition : panel off telephone mute (active low) se key inpurt port (active low) option diode matrix input port. Option diode matrix output port. Radio mode cont...

  • Page 29

    Function of micomic upd178016gc for acp-0108 series 27 pin 31 32 29 28 50 44 52 34 35 53 54 68 2 43 assign p_fmvco if request port. Local mode high dx mode low (radio mode) mono mode high streo mode low pll error out1 port. Pll error out2 port. Rds data input port. Multi-path input port. * multi-pat...

  • Page 30

    Function of micomic upd178016gc for acp-0108 series 28 pin 15 40 37 38 25 24 17 23 assign metal on : high, metal off : low output. Deck mute port, tape mode output port. Tape fwd/rvs play condition input port dolby mode (active high) p_tape p_tape in p_fwd in p_ff in p_dolby p_mtl p_dmute descriptio...

  • Page 31

    Matrix table of key & opt. Diode for acp-0108 series key matrix table : return source ks 6 (49) mi (top) t.Up ki 1 (50) ki 2 (51) ki 3 (52) ki 4 (53) ki 5 (54) t.Down m2 (intro) m5 (disc down) audio down - m3 (repeat) m6 (dics up) audio mode loc/loud (b:loc) ta/ta-stby (b:scan up) disp/pty (b:disp) ...

  • Page 32: 11. Ic Block Diagram

    11. Ic block diagram 11-1. Lc75854 (ic lcd driver) :ic401 30

  • Page 33

    Ic lock diagram 31 11-2. Saa6579t (ic audio):ic101.

  • Page 34

    Ic block diagram 32 11-3. Tda8571j (ic audio power):ic304.

  • Page 35

    Ic block diagram 33 11-4. Lc75371m (ic evr) : ic303.

  • Page 36: 12. Liquid Crystal Display

    12. Liquid crystal display 12-1. Akl-5010rc 34 ic no lcd no. Com1 com2 com3 com4 39 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -- t1 1a ch af 9h 9a t2 track 8h 8a t3 col1 7h 7a cd rpt 1b 1f 9b 9g 90 9f 8b 8g 80 8f 7b 7g 70 my rdm 1c 1g 9i 9k 9l 9n 8i 8k 8l 8n 7i 7k 7l loud int 1d 1e 9c 9d 9m 9e 8c 8d 8m 8e...

  • Page 37

    13. Output connector descriptions 35 13-1. 26 pin connector 13-2. 8 pin connector the pins in the iso connector have the following functions (connector seen from the rear) a. Electric connections 1. T.Mute : brown 4. Back-up+12v : yellow 5. +12v (electric antenna) : blue 6. Dimmer : pink 7. +12v sup...

  • Page 38

    13-3. 13pin connector output connector description 36 1 rear left sp(-) rear right sp(+) negative ground right (illumination) battery b+(back-up) front right sp(-) front left sp(-) rear right sp(-) auto ant acc b(+)power front right sp(+) front left sp(+) rear left sp(+) 8 9 10 11 12 13 2 3 4 5 6 7 ...

  • Page 39: 010301

    Daewoo electronics co., ltd 686, ahyeon-dong mapo-gu seoul, korea c.P.O. Box 8003 seoul, korea telex : dwelec k28177-8 cable : “daewooelec” e-mail : g7f00e@web.Dwe.Co.Kr tel : 82-2-360-7799 fax : 82-2-360-7877 akr0108efo 010301 edited by mc. Cem.