Summary of DDC500
Page 2: Contents
Model name: ds-5340 premier confidential contents warning function test troubleshooting explode diagram service parts lists packing diagram firmware update procedure.
Page 3: 2. Warning
2. Warning if you are using ac power adapter, unplug the adapter from the ac power outlet after you have disconnected the camera. Do not touch the power plug during a thunderstorm if you are using the ac power adapter. This may cause an electrical shock. Do not insert or drop metallic or inflammable...
Page 4: 3. Function Test
3. Function test tool/equipment sd card*2, tv, ac adapter, lens -wiping paper usb cable, flower, accessory, computer operation description item operation description 1 power on: insert base, sd card and ac adapter and power on. Check if start-up sound and image are correct. 2 preview display test: t...
Page 5
11 format sd card & internal memory (it can be done when connect to tv): press menu button in playback mode. Select format in setup and format sd card; take out sd card after format is ok and set sd card to lock state. Insert sd card again in capture mode, lcd displays the card is protected. 12 syst...
Page 6: 4. Troubleshooting
4. Troubleshooting item ng point ng analyzing solution power on fail (without current) 1>. Check if the connection between mcu board and power board is ok; 2>. Check if the fuse f801, f802 on power board are broken; 3>. Check if related circuit of power key on shutter board sw301 is normal; 4>. Chec...
Page 7
Noise 1>. Check if lens is normal. Change another lens; 2>. Check if power wire of camera is ok. Tft-lcd is too dark 1>. Check if the power, resistance and audion of lcd back light circuit are ok; 2>. Check if lcd is ok. Tft-lcd displays white image 1>. Check if lcd interface is inserted to the end ...
Page 8
Fail to trigger/ miss flash 1>. Check if the tube is offset, tube wire is cold soldering, insufficient soldering, and lampshade/ flash wire are insulated well; 2>. If 1> is normal, check if lampshade and copper foil contact is ok, contact resistance of lampshade and tube is infinite; 3>. Check if bi...
Page 9
5. Explode diagram reference only part order; please refer to section 6 service parts list any alteration of parts number is conducted by sales representative..
Page 10: 6. Service Parts List
6. Service parts list item parts name pcs / set premier p/n remark 1 front cover assy 1 9m744-4200 2 rear cover assy 1 9m744-4400 3 top cover 1 9m734-400-3ag 4 main pcb assy 1 9m747-0101 5 power pcb assy 1 9m747-8101 6 sw1 pcb 1 9m747-6000 7 lens module assy 1 9m746-6000 8 main frame 1 9m744-4800 9 ...
Page 11
Packing diagram.
Page 12: Firmware Update Procedure
No part name part number 1 ce/fcc s/n lb 9m738-500 2 hdpe bag 04039-023-1 3 pouch 9m739-301-pre 4 strap 9e538-000 5 kit pad 9m739-200 6 kit box 9m739-240-pre 7 pp bag 04039-095a 8 instruction manual 9m739-400 9 cd-rom 9m739-a00 10 c/t pad 9a339-694 11 c/t pad 9a339-695 12 c/t 9a339-602 firmware upda...
Page 13
To update this camera firmware, you will need to have 1. The new firmware file from premier. 2. One sd card. 3. One card reader. Please follow the steps below to perform the update process: 1. Prepare a formatted and empty sd card. 2. Insert a sd card to the card reader. Copy the firmware file (file...