Daewoo DHC-X100E Instruction Manual

Summary of DHC-X100E

  • Page 1

    Instruction manual digital home cinema system d h c - x 1 5 0 e thank you for purchasing the digital home cinema system. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and ...

  • Page 2

    Instruction manual digital home cinema system d h c - x 1 0 0 e thank you for purchasing the digital home cinema system. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and ...

  • Page 3

    3 2 caution : to reduce the risk of electric shock, do not remove cover(or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Warning : to prevent fire or electric shock, do not expose this appliance to rain or moisture. This symbol is intended to alert the user...

  • Page 4

    5 table of contents 4 precautions 1. Warranty claim you can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number. 2. Recording copyright recording of copyrighted material for other than personal use is illegal without permission of the copyright...

  • Page 5

    7 1. Standby indicator 2. Standby / on button 3. Dvd/video cd/mp3 cd/audio cd disc tray 4. Remote control sensor 5. Display 6. Master volume control 7. Open/close ( ) button 8. Play ( ) button 9. Stop ( ) button 10. Prev ( ) button 11. Next ( ) button 12. Function button 13. Phones jack front panel ...

  • Page 6

    9 1. Pro logic indicator 2. Dolby digital indicator 3. Dts indicator 4. Dvd indicator 5. Vcd indicator 6. Mp3 indicator 7. Drc indicator 8. Sleep indicator 9. Repeat indicator 10. All indicator 11. Total indicator 12. Remain indicator 13. Rds indicator 14. Play indicator 15. Pause indicator 16. Titl...

  • Page 7

    This machine can play back the following discs. Maximum playback time approx. 240minutes (single sided disc) approx. 480minutes (double sided disc) approx. 80minutes (single sided disc) approx. 160minutes (double sided disc) approx. 74 minutes approx. 20 minutes approx. 74 minutes approx. 20 minutes...

  • Page 8

    13 connecting to audio/video equipment before connecting refer also to the instruction manual of each component to be connected. When you connect the machine to audio/video equipment, be sure to turn off the power and unplug all the units from the wall outlets before making any connections. Connect ...

  • Page 9

    15 making antenna connections s-video out (dvd only) connecting the supplied antennas adjusting the position of the fm antenna while listening to an fm program, extend the antenna and move it in various directions until the clearest signal is received, then secure the antenna with push pins in the p...

  • Page 10

    17 before operating your machine, you need to set up the speaker configuration and the delay time from the listening position to each speaker. Note it is not necessary to set the parameters again once you have completed the setup unless you change the speaker configuration. 1. Press spk setup to dis...

  • Page 11

    Press slow during playback. Each press of [slow] changes the slow- motion speed as follows: dvd:sf 2x sf 4x sf 8x sf 16x sr 2x sr 4x sr 8x sr 16x play vcd:sf 1x sf 2x sf 3x step bwd play notes the sound is muted during slow-motion playback. To resume normal playback, press play or press slow repeate...

  • Page 12

    Locating a specific location by entering the time notes some discs may not respond to this procedure. Some scenes may not be located precisely. When vcd stop, this method for accessing specific locations is available only within the current title of the video cd. 1. Press go to. Make sure that the n...

  • Page 13

    Radio listening 23 there are two ways to select radio stations: one is manual tuning and the other is presetting radio stations then selecting the preset channels. Tuning stations 1. Press tuner. 2. Press or to tune to the station. Station select mode will be changed from preset to manual tuning. 3....

  • Page 14

    25 press volume on the remote control unit or turn volume on the machine. The volume level increases or decreases. Various functions common to all the sources adjusting the volume press sleep on the remote controller. “sleep 10” and sleep indicator appears in the machine’s display, which means the m...

  • Page 15

    27 you can play a specific title, chapter, track or segment repeatedly (title repeat, chapter/track repeat, all tracks and a-b repeat). You can play the same title, chapter, or track repeatedly (title, chapter/ track repeat). Repeating a title, chapter, or track press repeatedly repeat to select the...

  • Page 16

    29 1. Press angle while playing a scene recorded with multiple angles. Press angle while the angle icon is displayed. Some dvd discs may contain scenes, which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different a...

  • Page 17

    31 1. Press subtitle during playback. The subtitle setting is displayed for about 3 seconds. 2. Press subtitle. Each time you press subtitle, the subtitle language changes to the next language included on the dvd video. Selecting a subtitle language you can display subtitles on the tv screen and sel...

  • Page 18

    Press display while the disc is stopped or playback. Each time you press display, the on-screen display on the tv screen changes as follows. In case of dvd video title 01/09 chapter 005/044 00:51:40 title remain 00:10:00 chapter elapsed 00:08:00 chapter remain 00:01:00 33 you can view information ab...

  • Page 19

    35 34 selecting a setting when you insert a dvd video, video cd, the various functions of the machine will be set (reset) according to the setting menu. You can customize this setting menu according to your preference. The setting menu asks you to select a setting category from among language, audio...

  • Page 20

    Once the initial settings have been completed, the player can always be operated under the same conditions whenever the power is switched on. These settings are called setup data that are easily modified and stored using the setup menu. The setup menu includes the information for audio and other sys...

  • Page 21

    39 38 remedies • check the connection of the power cord. • disconnect the power cord, then connect it again. • contact your nearest service center. • deactivate the muting function. • check the connections to the machine. • contact your nearest service center. • check the speaker connections. • sele...

  • Page 22

    Ot he rs to add the active subwoofer system(user optional) specifications ot he rs 40 41 power supply ac 110v or 120v or 127v or voltage ( option ) 220v or 230v or 240v (50/60hz) power consumption standby 2watt operating 90watt dimensions (w x d x h) / weight 360 x 380 x 70mm/ 6.0 kg power output at...