48586200e10g-r1.
S p e a k e r plasma display tv speaker plasma television instruction manual plasma display tv wall hanger unit plasma display tv stand s t a n d h w a a n l g l e r u n i t dts-42sp dts-hg10 dp-hg10 dts-hg20 dp-hg20 dts-hg22 dp-hg22 dts-42st.
S p e a k e r plasma television speaker instruction manual dts-42sp thank you for purchasing the daewoo electronics plasma television speakers. These speakers are specifically designed only for the daewoo plasma television. To ensure the safe operation of the unit, please read these instructions bef...
1 table of contents 1. Check for enclosed parts ............................ 2 2. Important safety instructions ...................... 3 3. Assembly instructions ................................. 5 1) using speakers when attached to the plasma display.
Plasma television speaker 2 s p e a k e r 1. Please check the following items shown below (2) (16) (2) (4) (2) (4) speaker m5 screws vibration absorbent sponge special screws / round head screws(option) speaker wires fixed brackets stand(option ) (2) clamp wire (2).
3 2. Important safety instructions please keep these instructions for your safety and to prevent any damage to this unit. Please follow these instructions for your safety (doing so may cause the unit to fall and break) (failing to do so may cause the unit to vibrate and to fall) (failing to do so ma...
Plasma television speaker 4 s p e a k e r please be careful not to stain the speakers with any gas or oil. When assembling, be sure to use the enclosed parts and make sure all parts are tightly screwed as instructed. Do not place the speakers in a humid or dusty place. Do not place the speakers near...
5 3. Assembling instructions using speakers when attached to the plasma display attaching vibration absorbent sponges to speakers installing fixed brackets to speakers . Clean the surface with soft, lint-free cloth where sponges will be attached. . Attach the sponge to the side of the speaker that w...
Plasma television speaker 6 s p e a k e r installing speakers to the plasma display . Place a protective covering over the surface you will be working on and lay the plasma display as shown below. .Take the speakers with fixed brackets to the back of the plasma display. Place the hooks onto the fixe...
7 connecting speaker wires . Take the speaker wire(2) and use the red cord to connect to and fro (+) inputs, and use the black cord to connect to and fro (-) inputs. 4 . Please be sure to connect red cord with (+) and black with (-); otherwise, speakers will not produce clear sounds. . Please retain...
Plasma television speaker 8 s p e a k e r installing speakers to its own stand.(option) uninstalling speakers from its own stand.(option) . Use a coin to secure the special screws (round head screws) tightly. Please be sure to have the vibration absorbent sponge onto the side of the speaker where th...
