Daewoo DPB-280L Owner's Manual - page 10
10
2. While the unit is off, press the TIMER
ON button; the display will light waiting
input for the timer, but the actual unit
will not turn on.
3. Repeatedly press the TIMER ON button until the de-
sired hour that you want the unit to turn on appears
on the display. For example, if it is
1:00 P.M. and you want the unit to
turn on at 4:00 P.M., select 3 hours.
4. Press the ENTER button to input the setting into
memory; the unit will beep, the TIMER indicator will
light on the unit and the TIMER indi-
cator on the remote will light to indi-
cate the unit is in the timer mode.
1. Press the ON/OFF button of timer on the remote control to set the on timer mode, “HOUR” and “ON” on the remote
display will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get desired
time. Then, if pressing “ENTER/CANCEL” button, ON TIMER Mode will be started. If you want to stop ON TIMER
Mode, please press “ENTER/CANCEL” again.
TO SET ON TIMER MODE
This unit can be set to automatically turn on after a predetermined amount of hours (up to 24) in the order of 0.5, 1, 1.5,
2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24.
AUTO
5. Place the remote controller so it is facing the unit.
When the desired hour is reached, the unit will turn on
to the selected mode.
NOTE :
Press the ENTER button within 5 seconds
of selecting the desired time. If mote than 5 sec-
onds elapse, steps 3 and 4 must be repeated.
1. • Press the sleep mode button, 4 indicator appears in
the display. The unit will turn off after 4 hours from now
• You can select fan direction
• You can select auto, low, middle,
high, natural of fan speed(at first fan
speed is low)
TO SET SLEEP MODE
- Press sleep mode button while air conditioner is on
NOTES:
To set sleep mode is not available on fan mode and quick mode