Daewoo DPN-4274NHS Service Manual - page 46
Manual is about: 42" PDP
of
61
-45-
Main PCB Trouble Diagnosis
N
Check the connection of LED PCB
to MAIN PCB
Check start
N
N
N
Y
Y
Y
Replace LED PCB.
Y
Y
Does LED next to Power S/W
turn on (red light)?
Is Remote Controller
working?
Does Set turn on by
pressing a key button?
Using an oscilloscope
check TP113 near PC101.
Does it output a signal whenever a remote
controller button is pressed?
1. Check AC connection
2. Check Power S/W ON
3. Check other BLOCKs
Check the Battery of
Remote Controller
1. IR Receiving BLOCK of MAIN PCB is not
working.
2. Replace MAIN PCB
7. When Remote Controller does not operate