- DL manuals
- Daewoo
- Receiver
- DSD-9230E
- Instruction Manual
Daewoo DSD-9230E Instruction Manual
Summary of DSD-9230E
Page 1
Dsd-9230e d i g i t a l pr pr pr ok/list menu tv/radio exit pause txt tv/av l r info epg uhf alt-audio d i g i t a l broadcasting digital v video d i g i t a l.
Page 2: Contents
D i g i t a l contents general information 3 main features of dsd-9230e 3 for your safety 4 unpacking 4 general operation of dsd-9230e 4 remote control 5 front panel 6 rear panel 6 installation of dsd-9230e 7 connecting to antenna & tv 7 connecting to tv & vcr using scart support 7 connecting to tv ...
Page 3: General Inforamtion
3 d i g i t a l dsd-9230e digital satellite receiver is easy to use and a free-to-air receiver that allows you to watch digital programs broadcasted via satellite. This instruction manual will guide you through the initial installation of your receiver. It also describes how to take full advantage o...
Page 4: General Inforamtion
4 d i g i t a l . Allow clear space of more than 10cm from the top, back and both sides of dsd-9230e for sufficient ventilation. . Do not cover the dsd-9230e nor place it on a unit that emits heat. . Use a soft cloth and a mild solution of washing liquid to clean the casing. . Do not connect or modi...
Page 5: General Inforamtion
5 general inforamtion d i g i t a l remote control pr pr pr ok/list menu tv/radio exit pause txt tv/av l r info epg uhf alt-audio d i g i t a l key function switches between the operational mode and stand-by mode of the receiver (green lamp lights up during the operation, red lamp lights up in stand...
Page 6: General Inforamtion
Key function switches between the operational mode and stand-by mode. When watching, changes the channel, or in the menu, moves to the previous and next item. General inforamtion 6 d i g i t a l front panel rear panel caution 90-250v~ 50/60hz, 30w s _ vhs video ant tv/vcr r _ audio l _ audio vcr lnb...
Page 7: Installation of Dsd-9230E
7 installation of dsd-9230e d i g i t a l in tv dsr terrestrial antenna satellite dish scart in tv dsr vcr in from ant video in video out ch3 ch4 out to ant cable or terrestrial antenna satellite dish this section explains the installation of dsd-9230e. Refer to the manuals supplied with the equipme...
Page 8: Installation of Dsd-9230E
Installation of dsd-9230e 8 d i g i t a l connecting to tv using rca support in r l video audio tv dsr satellite dish connecting to tv using s-vhs support in r l s-vhs audio tv dsr satellite dish.
Page 9: Installation of Dsd-9230E
9 installation of dsd-9230e d i g i t a l connecting to tv using rf support in tv dsr vcr in from ant video in video out ch3 ch4 out to ant cable or terrestrial antenna satellite dish connecting to another svr in tv dsr another svr tv/vcr ant scart satellite dish.
Page 10: Initial Installation
Initial installation 10 d i g i t a l once you have correctly connected the dsd- 9230e, "install wizard" will guide you through the installation process. When you turn on the dsd-9230e, this picture will be displayed and this picture indicates that you have started the installation procedure. This "...
Page 11: Initial Installation
11 initial installation d i g i t a l select your local time referring to the city name displayed on the screen. Local time can be adjusted +/- 12 hours in reference to utc. For example, if you are in london, local time shall be 0:00. And if summer time is in effect, select on from the menu. Local t...
Page 12: Initial Installation
Initial installation select the type of your lnb. If you have universal lnb, select yes. Otherwise select no. Select lnb enter the proper lnb frequency referring to your lnb using numeric key on the remote control. Or use the on screen keypad displayed by pressing ok key. If you have a dual lnb, ent...
Page 13: Initial Installation
This message shows that you have completed the setting of only one antenna. To confirm, select no. To continue, select next, and press ok key. If you have other antennas to configure, select yes. To continue, select yes. To continue, select next and press ok key. Then it will take you to the select ...
Page 14: General Viewing Function
General viewing function 14 d i g i t a l the following describes the basic functions of your dsd-9230e while watching satellite tv or listening to satellite radio. If you select a channel to which you do not have access, you will get a message on the screen. This message may vary, depending on type...
Page 15: General Viewing Function
15 general viewing function d i g i t a l press pause key on the remote control to pause the screen. To bring it back to the normal mode, press pause key once again. Frame pause press key on the remote control to move to the previous channel you were watching. Pr previous channel recall while viewin...
Page 16: General Viewing Function
General viewing function 16 d i g i t a l whenever you change channels, program information is displayed for a few seconds. While viewing channel, you can see the current channel information anytime by pressing info key on the remote control. Note : channel information is displayed for 5 seconds. Ch...
Page 17: Channel Manager
17 channel manager dsd-9230e provides powerful channel managing functions to allow various operations. Press menu key on the remote control to display main menu on the screen. To quit, press exit key. There are five items in the main menu ; - channel manager - program guide - timer - user installati...
Page 18: Channel Manager
Channel manager 18 d i g i t a l in this menu you can see the channel list searched by dsd-9230e on the left side. And on the right side, the current channel information is displayed. Press menu key on the remote control, then command menu is displayed. There are six functions available from the tv ...
Page 19: Channel Manager
19 channel manager d i g i t a l the move feature allows you to change the channel number. Select move from the tv channel manager. Select the channel you want to move by pressing ok key. Then using pr key, move the channel to the desired location. Press ok key to confirm your change. Check whether ...
Page 20: Channel Manager
Channel manager 20 d i g i t a l the delete feature allows you to delete a channel. Select delete from the tv channel manager. Select the channel you want to delete and press ok key. Then the selected channel will be highlighted with a ‘x’ mark. If you want to cancel the selection, press ok key agai...
Page 21: Channel Manager
21 channel manager d i g i t a l fast edit mode allows you to edit channel fast without switching to a selected channel. If you disable the fast edit mode, dsd-9230e will show programs in the tv channel manager each time a channels is selected. Note : fast edit mode is enabled in the factory default...
Page 22
22 d i g i t a l epg (electronic program guide) dsd-9230e provides epg function for you to get access to the tv guide(or radio guide if you are listening to radio channels) which provides information on the current and next programs on different channels. To access epg, press epg key on your remote ...
Page 23: Timer
23 d i g i t a l timer the “timer” feature allows you to program the timer in various ways. Note : dsd-9230e displays the time information given by the satellite. So there may be slight difference between actual the standard time and dsd- 9230e’s time. To activate the timer, set the “enable” select ...
Page 24: User Installation
24 d i g i t a l user installation dsd-9230e features install wizard system which allows you to set up the receiver with minimum effort. This user installation is for advanced users or installers to set up in detail or up- grade the dsd-9230e with advanced functions. There are six sub-menus; - insta...
Page 25: User Installation
25 d i g i t a l user installation you can also use the go to function and use the antenna direction help function. On how to use the go to menu, refer to page 21, go to function. In this section antenna direction help function is described. To change the satellite name, press menu key and select sa...
Page 26: User Installation
26 d i g i t a l user installation once you have entered your coordinates, select compute and press ok key. Then the exact information of antenna pointing direction will be displayed. Antenna direction help channel search menu allows you to search for channels in a new tp or satellite. Dsd-9230e all...
Page 27: User Installation
27 d i g i t a l user installation once you have entered new values, check whether you correctly entered the values and positioned the antenna by referring to signal level bars. If the level bar is highlighted to orange color, then you can run a tp search or satellite search. If you want to delete a...
Page 28: User Installation
28 user installation if you want to set up a specific pid (packet identification), select the tp and press menu key to display command box for channel search. Select set pid option and press ok, then set pid menu will be displayed. Enter the appropriate value and select ok. Note : you can acquire th...
Page 29: User Installation
29 d i g i t a l user installation system setting menu allows you to change the key options set by install wizard and other settings. 1) osd language : select your language. 2) set local time : select your local time. 3) summer time : select yes if summer time is in effect. 4) lnb power : if your ds...
Page 30: User Installation
30 user installation this function allows you to lock a channel with your password in order to prevent your children or any other person from accessing the channels. You can also protect your installed data and information using install lock. * how to change the password 1) enter the current passwor...
Page 31: User Installation
31 d i g i t a l user installation * how to use install lock 1) enter the current password. 2) select install lock to on. 3) enter a new password. 4) confirm your new password by entering the new password again. 5) exit from this menu and press the stand- by key. 6) turn on dsd-9230e and press menu ...
Page 32: Receiver Information
32 receiver information in the receiver information, you can see the information of the product, its version and contact point of the supplier. : upload in process : download in process : error in data transmission : tv mode : vcr mode : system waiting : flash rom error : system booting d i g i t a ...
Page 33: Trouble Shooting
33 d i g i t a l trouble shooting problem possible causes what to do the display on the front panel does not light up. No sound or picture, and the front panel shows red light. No sound or picture. Bad picture / blocking error main cable is not connected. The dsd-9230e is in stand-by mode. The satel...
Page 34: Trouble Shooting
34 d i g i t a l trouble shooting problem possible causes what to do no welcome menu on the screen after you switched on the dsd-9230e for the first time. There are interferences on your digital satellite channels, caused by an existing terrestrial channel or video signal. The remote control is not ...
Page 35
P/n:48586200e101-r0