Model no. : dtk-28_ dtm-28_ dtm-29_ colour television instruction manual manufactured under license from dolby laboratories. "dolby" and the double-d symbol are trademarks of dolby laboratories..
1 identity of features on local and remote control local control remote control main power button volume down/up button remote sensor tv/av (menu) audio input video input head- phone pr ant av1 programme down/up button indicator s-vhs input (dtm-28_) (dtm-2 9 _) aerial terminal scart socket 1 scart ...
2 contents l l identity of features on local and remote control 1 l l important safeguards 2 l l installation -inserting batteries into the remote control unit 3 -aerial connection 3 -mains connection 3 -switching the set on and off 4 -on screen display menu 4 -language selection 4 -automatic tuning...
3 installation if the set is moved or placed in a different direction, the main power button must be switched off for at least 15 minutes in order to take out a colour strain on the screen. Press down the battery compartment grip and slide the cover. Insert the batteries supplied (two 1.5v, type aaa...
4 switching the set on and off switching on • switch the set on with the main power (on/off) button. The indicator will illuminate in red. That means the set is on stand-by mode. • press pr up or down button on the front of set or power button( ) or pr up/down button or one of the number button (0.....
5 • press the right button. Auto setup will begin, your stations will be located and stored. • please wait until the edit menu appears. If you don’t want to edit programme now, escape from menu with the menu button. You can do it later. The edit menu shows you information as follows: - programme pos...
• press the number buttons (0..9) or the up / down button to select a pro- gramme number you want. • locate the selection bar on the manual tune at the install menu. • select the system with picture(cyan) button. Select the "secam-f" for a french stations and "pal or secam" for the others. • press t...
7 daily use recall the recall button is used to display the current status: programme number, station name, sound system, clock. This display appear for 2 seconds. The set has totally 100 programme numbers, 0..99. The number buttons 0..9 are used for direct programme selection. To select two-digit p...
Sound control • press the menu button. • place the selection bar to the sound with up/down button. • press the right button to call up sound menu. • select the required function by moving the selection bar ith the up / down buttons. • press the right button to call up the each sub-menus. Equalizer :...
Automatic clock setting and correction even though you turn the tv off with main power (on/off) button, if you select a programme of your country which has teletext or pdc transmission, clock will be set and corrected automatically. This function is only available for the countries as follows: deuts...
10 switching teletext on/off press the text button( ). The index page or the page viewed last will appear. Press the text button again to return to the tv mode. Colour buttons in top/flof teletext a red, green, yellow and blue field is shown at the bottom of the screen. If top or flof teletext is tr...
11 brightness and contrast control in teletext mode pressing the menu button repeatdely in teletext mode, the brightness and contrast control menu will be displayed in the bottom of the screen. You can adjust these using the left/right button on the remote con- troller. Double window in text mode yo...
