Daewoo DVC-6740 Instruction Manual - Cleaning And Maintenance

23

CLEANING AND MAINTENANCE

Door removal

In order to obtain easier access to the oven 

chamber for cleaning, it is possible to remove 

the door. To do this, tilt the safety catch part 

of the hinge upwards (fig. A). Close the door 

lightly, lift and pull it out towards you. In order 

to fit the door back on to the cooker, do the 

inverse. When fitting, ensure that the notch of 

the hinge is correctly placed on the protrusion 

of the hinge holder. After the door is fitted to 

the oven, the safety catch should be carefully 

lowered down again. If the safety catch is not 

set it may cause damage to the hinge when 

closing the door.

Removing the inner panel

1.  Using a flat screwdriver unhook the up-

per door slat, prying it gently on the sides 

(fig. B).

2.  Pull the upper door slat loose. (fig. B, C)

Tilting the hinge safety catches

A

B

C