Dvd recorder dvd recorder dvr07 user manual dw-q74d2n-ls(gb)usa 2005.9.21 3:21 pm ˘ ` a mac001 1200dpi 90lpi.
I important safeguards important safeguards caution: to reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert ...
Introduction ii caution: please read and observe all warnings and instructions in this owner’s manual and those marked on the product. Retain this manual for future reference. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire...
Iii 5 do not use this product near water. For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6 clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid clean...
Introduction 1 important safeguards _________________________i table of contents ______________________________1 overview ______________________________________2 identification of controls_______________________6 introduction connecting antenna/cable ____________________11 connecting a tv __________...
2 overview overview dvd, dvd+r, dvd+rw? What is a dvd? Dvd (digital versatile disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. Dvd video uses modern mpeg2 data compression technology that enables an entire feature film to be stored...
Introduction 3 disc-related terms title (dvd only) the main film, accompanying feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (dvd only) sections of a movie or a musical piece that are smaller than titles. A title is compose...
4 overview notes on recording • the recording times shown are not exact because the dvd recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • when recording a tv broadcast, if the reception is poor or the picture con...
Introduction 5 cleaning the unit to clean the cabinet use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. To obta...
6 front panel ! Power (standby/on) turns the dvd recorder on and off. @ disc tray (dvd deck) insert a disc here. # front panel display shows the current status of the dvd recorder. $ open/close opens or closes the disc tray. % rec starts recording. Press repeatedly to set the recording time. ^ play/...
Introduction 7 front panel display channel identification of controls ch23 tv channel c123 catv channel input mode aw-1 av1 input aw-2 av2 input dw dv input recording on disc 1 1 : 1 5 indicates a dvd timer recording is set. 1 1 : 1 5 indicates a dvd timer recording is in standby mode. 1 1 : 1 5 ind...
Starts recording. Press repeatedly to set the recording time. For more details, refer to one touch record (otr) on page 39. - starts playback. - pauses playback or recording temporarily. Press again to exit pause mode. Stops playback or recording. Selects recording mode: - approx 1 hour (hq mode), 2...
Introduction 9 displays a disc’s title menu, if available. Enlarges the dvd video image. Selects a dvd camera angle, if available. Displays the edit menu for dvd+rw/+r discs or sets a chapter marker. Displays the finalize menu for dvd+r discs. Displays the digest menu for dvd+rw/+r discs. Repeats th...
10 ! Rf out (to tv) connect to a tv with an rf coaxial input. @ rf in (from ant.) connect to your antenna or cable tv outlet. # av out (video, l-audio-r) connect to a tv with video and audio inputs. $ line2 (video, l-audio-r) connect to the audio/video outputs of an external source (vcr, camcorder, ...
Introduction 11 connecting antenna/cable connections 1 disconnect the antenna/cable from the rear of your tv. 2 connect this cable to the jack marked ant in (from ant.) on the rear panel of the dvd recorder. Cable service without cable box if your cable wire is connected to your tv without a convert...
12 progressive scan connection • if your television is a high-definition or ‘digital ready‘ television, you may take advantage of the dvd recorder’s progressive scan output for the highest video resolution possible. • if your tv does not accept the progressive scan format, the picture will appear sc...
Connections 13 connecting to an amplifier equipped with two channel analog stereo or dolby pro logic ll/pro logic connect the left and right audio out jacks on the dvd recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (a). Co...
14 connections to receive audio/video signals from other equipment, connect the line1 or line2 jacks on the dvd recorder to the audio/video out jacks on your external component, using optional audio/video cables. Connecting optional equipment using the front panel dv in jack, it is possible to conne...
Connections setup 15 after successfully connecting your dvd recorder to your tv and other devices, this chapter will show you how to complete the initial installation. 1 ‘initial setup wizard‘ is displayed on the screen. Make sure the rf cable from your antenna or cable tv jack is connected. 2 selec...
16 7 the dvd recorder detects channels automatically and stores them in memory. 8 after finishing auto channel search, set the clock. 9 use [ œ/√] to move left/right and use […/†] to change the settings. 10 after setting the clock, press [enter] to confirm. If you cancel the process during initial i...
Tuning band 1 press [setup]. The setup menu appears. While ‘init setup‘ is selected, press [enter] to go to the initial setup page. 2 use [ œ/√] to select ‘installation page ‘. 3 while ‘installation page ‘ is selected, press [ †] to select ‘tv/catv‘. 4 press [ √] to move to the second level. 5 use [...
Modulator out this feature allows you to set the rf output channel to your tv (you only need to set this if you are using the rf out connection to your tv). 1 follow steps 1-2 as shown under tuning band. 2 use [ …/†] to select ‘modulator out‘. 3 press [ √] to move to the second level. 4 use [ …/†] t...
Setup 19 set clock 1 follow steps 1-2 as shown under tuning band. 2 use [ …/†] to select ‘set clock‘. 3 press [enter]. The set clock menu appears. 4 enter the date and time. œ /√ (left/right): moves the cursor to the previous or next column. …/† (up/down): changes the setting at the current cursor p...
20 initial setup auto chapter during recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 min , 10 min or 15 min . But when you set dvd record quality “sep”, auto chapter interval could be set only ‘10 min’ or ‘15 min’. To turn off automatic chapter m...
Setup 21 osd language select a language for the dvd recorder setup menu and on-screen displays. 1 press [setup]. The setup menu appears. While ‘init setup‘ is selected, press [enter] to go to the initial setup page. 2 use [ œ] and [√] to select ‘languages page ‘. 3 while ‘language‘ is selected, pres...
22 initial setup 1 press [setup]. The setup menu appears. While ‘init setup‘ is selected, press [enter] to go to the initial setup page. 2 use [ œ/√] to select ‘preference page ‘. 3 while ‘preference page ‘ is selected, press [ †] to select ‘video‘. 4 press [ √]. The ‘video‘ submenu is displayed. Tv...
Setup 23 follow the same procedure as video settings to select audio settings. Digital output 1 use [ …/†] to select ‘digital output‘ while the audio submenu is displayed. 2 press [ √] to go to the second level. 3 use [ …/†] to select the desired digital output type. 4 press [enter] to confirm your ...
Set parental level the parental controls feature allows you to prevent dvds from being played based on their ratings or to have certain discs played with alternative scenes. You can set the parental level from 1 to 8. 1 press [setup]. The setup menu appears. While ‘init setup‘ is selected, press [en...
Change password 1 while ‘preference page ‘ is selected, press [ †] to select ‘parental ctrl‘. 2 select ‘password‘ then press [ √] to select ‘change‘. 3 press [enter]. The input password submenu appears. Enter your current 4-digit password then press [enter]. 4 enter a new 4-digit password, then pres...
Auto clock auto clock enables the dvd recorder to set the clock automatically whenever it is in standby mode (plugged in but powered off). 1 use [ …/†] to select ‘auto clock‘. 2 press [ √] to go to the second level. 3 use [ …/†] to set the auto clock status to on or off . 4 press [enter] to confirm....
Setup 27 • some options cannot be reset, including parental controls, password, and country code. • after restoring defaults the unit reboots automatically and the installation menu appears. You must set the country, language, channel, and clock settings again. If you wish, you can reset the dvd rec...
28 the on-screen display provides feedback on the status of the dvd recorder and/or the currently loaded disc. To access the on-screen display (or osd), press the [display] button. 1 during disc playback, press [display] to show information about the current disc. 2 while the disc information is dis...
Playback 29 on-screen display overview • displaying icons on cdda disc track : shows the current track number and total number of tracks, and skips to the desired track number. Time elapsed : shows the elapsed playing time, and skips to the desired time. Audio effect : shows the current audio effect...
30 on-screen display overview some tv programs are broadcast with both a main and a secondary audio program (sap). You can change the tv audio using the [audio] button. Press [audio] repeatedly to change the tv audio, according to the broadcast audio signal as shown below. • stereo+sap audio signal ...
Playback 31 dvd playback dvd playback 1 press the [dvd] button to set the remote control to operate the dvd deck. 2 turn the tv on and select the video input source connected to the dvd recorder. Audio system: turn the audio system on and select the input source connected to the dvd recorder. When a...
32 dvd playback still picture and frame-by-frame playback 1 press [play/pause] during playback. The dvd recorder will go into pause mode. 2 you can back up or advance the picture frame-by-frame by pressing [ff ( √√)] repeatedly during pause mode. Fast forward/backward 1 press [rew ( œœ)] or [ff (√√)...
Playback 33 dvd playback a-b you can repeat a scene between two points (a and b): 1 press [play/pause] play to the start of the desired scene. 2 press [a-b] to mark the start point. 3 use [ff], [next] to search the end point. 4 press [a-b] to mark the end point. 5 the marked scenes are repeated cont...
34 disc menus many dvds contain disc menus that allow you to access special features. To open a disc menu, press [menu]. Then use the [0-9] buttons to directly select the desired options, or use the [ …†] buttons to highlight your desired selection and press [enter]. 1 press [menu]. The disc menu is...
1 insert the cd disc and close the tray. The audio cd or mp3 cd menu appears on the tv screen after a few moments to load the disc. 2 use [ …†] to select a track or a file, then press [play] or [enter]. During playback, the current track's elapsed playing time will appear on the menu. Playback will ...
36 other disc playback 5 press [next] or [prev] to manually skip to the next or previous image. 6 press [ √] (or [œ]) to rotate the image (counter) clockwise. 7 press [stop] to exit the slideshow. • when a cd contains both mp3 files and jpeg files, the default play mode is jpeg image files. • the dv...
Playback recording 37 follow the instructions below to record a tv program. 1 turn on the dvd recorder and load a recordable disc . Make sure your tv input is set to view the dvd recorder. 2 set the desired recording mode in dvd record quality menu by pressing [setup] button. Approx 1 hour (hq mode)...
38 total time and recorded time are displayed on the tv screen after pressing [display]. Recorded time is displayed on the osd. Checking the recording time 1 press [play/pause] to pause the disc during recording. 2 when you want to continue recording, press [play/pause] or [rec (●)]. To pause the re...
Recording 39 the timer recording function allows you to record up to 8 programs within a period of one month. 1 insert recordable media such as dvd±r ,dvd±rw. 2 press [timer]. Or press [setup] and select ‘timer rec’. Then press [enter]. The ‘timer recording’ menu appears. Use [ …†] to move to a time...
40 timer recording even if a timer recording is set, the dvd recorder will not record if: • no disc is loaded. • a non-recordable disc is loaded. • disc is protected in the ‘disc operation’ menu; see page 47. • there are already 49 titles recorded on the disc. You cannot enter a timer recording if: ...
Recording 41 you can record from an external component, such as a camcorder or vcr, connected to any of the dvd recorder’s external inputs. 1 make sure the component you want to record from is connected properly to the dvd recorder; see pages 11 and 14. 2 use [ … †] to select the external input to r...
42 recording from an external input using dv, also known as i.Link, you can connect a dv-equipped camcorder to the dvd recorder using a single dv cable for input and output of audio, video, data and control signals. The i.Link interface is also known as ieee 1394-1995. “i.Link” and the “i.Link” logo...
Recording disc operation&edit 43 for recordable dvd media, such as dvd±r and dvd±rw discs, you can manage the disc using the disc menu. The dvd±rw disc menu allows you to erase, lock, or unlock your disc. You can also make it compatible with most other dvd players. At first, go to disc operation mod...
Make compatible (dvd±rw) 'make compatible' for a dvd±rw will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing [menu] or [title]. 3 press [ …/†] to select ‘make compatible‘. 4 if you want to make the disc compatible, press [enter]. 5 to confirm, s...
Disc operation&edit 45 finalize (dvd±r, dvd-rw) finalizing a dvd±r, dvd-rw ‘locks’ its recordings in place so the disc can be played on most standard dvd players or computers equipped with dvd-rom drives. 3 use [ …/†] to select ‘finalize’ menu. 4 if you want to finalize the whole disc, press [enter]...
46 disc edit disc edit you can manage the titles on your dvd±r/±rw discs using the title menu. At first, go to disc edit mode. 1 press [setup]. The setup menu appears. 2 while ‘disc edit‘ is selected, press [enter] to go to the disc edit page. Label a title to change the name of a title: 2 select th...
Disc operation&edit 47 divide (dvd±rw) this feature allows you to divide a title into two titles. 2 select the title to be divided using [enter]. 3 select ‘divide’ using [ … †] . 4 press [enter] to divide the title. 5 select 'yes' and press [enter] to confirm. 6 press [enter] when the preferred pict...
48 edit chapters 2 select the title to be edited using [enter]. 3 select ‘chap edit’ using [ … †] . 4 press [enter] to edit the chapters. 5 select 'yes' and press [enter] to confirm. 6 the chapter edit menu will be displayed. Use [ œ √…†] to select one of the various chapter marker functions (add, d...
Disc operation&edit reference 49 check the following guide for the possible cause of a problem before contacting customer support. No power. No picture. No sound. Playback picture is poor. Dvd recorder does not start playback. Picture from external input is distorted. Some channels are skipped over ...
50 troubleshooting can’t play disc recorded on this dvd recorder on another dvd player. Cannot record or did not record successfully. Timer recording not possible. Stereo audio record and/or playback not present. Remote control does not work properly. The disc was not finalized (or not made compatib...
Reference 51 when the dvd recorder is moved from a cold place to a warm place. Under extremely humid conditions. Keep the dvd recorder plugged into an ac power outlet with the power on. This will help prevent condensation. When condensation has occurred, wait a few hours for the dvd recorder to dry ...
52 rca cable ............................................... 1 rf coaxial cable ..................................... 1 remote control ....................................... 1 batteries ................................................. 2 manufactured under license from dolby laboratories. ‘dolby‘ a...
Deam (daewoo electronics america) warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the company’s option) in exchange for any part of any unit of its manufacture which under nor...
