Service manual no-frost combi-refrigerator models: erf-366mnl / erf-396mnl erf-386mnl / erf-416mnl daewoo electronics manufacturing espaÑa, s.A..
. Contents 1. Specifications 2. External drawings 3. Real view 4. Machine room view 5. Refrigerant cycle 6. Wiring diagram 7. Components disassembly pictures 8. Door position change process 9. Explode drawing 10. Parts list 1.
1. Specifications remarks: * dept exception handle 1.2. Types of the approved safety standars 366mnl 386mnl 396mnl 416mnl freezer 94 109 94 109 refrigerator 218 218 252 252 total 312 327 346 361 height 1765 1854 1896 1985 width 600 600 600 600 depth * 642 642 642 642 * *** * *** * *** * *** n n n n ...
2. External drawings 3 600 18 b a c d 10 25 638.5 85 32.5 26 595.2 erf-386m erf-396m erf-366m erf-416m 1854 1811 model 492 554 524 1765 1896 1985 1722 1853 1942 967 1098 967 1098 698 698 787 787 862.5 862.5 993.5 993.5 621.5 621.5 710.5 710.5 a c b d f e.
3. Real view 4.
4. Machine room view 5 screw machine.
5. Refrigerant cycle 6 capillary tube.
6. Wiring diagram 7.
7. Components disassembly pictures - switch door - force switch door to the left side and input a thin driver in the rigth part as picture shows. After this operation, lift switch up. * remark: input driver carefully in order to lift up easily and avoid paint damages and scratches. - move switch to ...
- multi duct - unscrew all fixed screws. - remove insulator multi-duct. - unscrew defrost timer and thermostat. - take out temperature control knob by a minus driver carefully. 9.
- louvers: - unscrew the two fixing screw for diassembly louver a and b - disconnect fan motor housing - unscrew the fixing screw in order to disassemble louver a. 10 to disassemble it is necessary a star driver with a minimal lenght of 10 cm.
- when louvers are disassembled is very important check knob f louver position. Default position is m -change door open side - unscrew cover t hinge follow next sheets instructions to change door open side 11 l position h position l position.
Follow to remove 1. Remove“ cover hinge” and “ hinge t” 2. Remove“ r” door. 3. Remove “ hinge m” 4. Remove“ f” door 5. Remove“cover bracket” 6. Remove“ hinge u” 7. Reverse the position of“ cover bushing” 8. Move “ r door handle” to “ f door” 9. Reverse the position of“ cap dr bushing” 10. Move “ f d...
11. Attach the“ hinge u” on the left. 12. Attach the“ f door” 13. Reverse the position of “ hinge m” and “ cap screw hole” 1. Attach the“ r door” 15. Attach the“ hinge t” on the left of cabinet after assembling to“r door” 16. Reverse the position of “ cover hinge ” and “ cover cab harness” step 3 : ...
9. Explode drawing 14.
15.
366m 386m 396m 416m 1 3017839400 glass shelf (insert type) '04 3 3 4 4 2 3001402200 cover glass v/case (insert type) erf**4 1 1 1 1 3 dms1181910 case vegetable *l '04 blue milky 2006 1 1 1 1 blue milky dms1182010 case vegetable *r '04 blue milky 2006 1 1 1 1 blue milky 4 3011163200 case icing 1 1 1 ...
366m 386m 396m 416m 31 3010967400 cap door bushing (snow white) 1 1 1 1 snow white dms0967420 cap dr bushing silver 1 1 1 1 03 silver dms0967410 cap door bushing (dark gray) 1 1 1 1 dark grey 32 3019025200 pocket r 2 2 2 2 33 dms9026110 pocket botl as 1 1 1 1 blue milky 34 3019026200 pocket multi as...
366m 386m 396m 416m 68 3016004300 special screw a 4 4 4 4 69 dms6402129 capacitor runniing finish 4uf 1 1 1 1 70 dms6006510 special washer r/c 1 1 1 1 71 dms6006410 special nut r/c 1 1 1 1 72 dms0527900 relay box 1 1 1 1 73 dms1200100 clamp cord a 1 1 1 1 74 dms1200200 clamp cord b 1 1 1 1 75 dms1a0...
Daewoo electronics manufacturing espaÑa s.A polígono industrial de júndiz c/zurrupitieta 27, 01015 vitoria, spain tel: 00 34 945292292 fax:00 34 945290965.
