Daewoo FR-15A Instruction Manual - Changing The Reversible Door

8

7. Insert the bottom hinge at the left side

using the two screws previously removed

in step 6.

NOTE: Do not tighten screws.

8. Stand the cabinet.

9. Replace the door making sure the bottom

socket enters the bottom hinge pin. 

Be sure washer is in place.

10. While holding the door in the closed

position, secure the top hinge at the left

side using the two screws previously

removed at the beginning in step 2. 

Do not tighten the screws until the top of

the door is leveled with the top cabinet.

11. Replace the hinge cover.

13. Tools required:

-8MM & 10MM socket-ratchet.

-Putty knife or thin-blade screwdriver.

12. Replace plugs.

7

CHANGING THE REVERSIBLE DOOR

This refrigerator has been built with the door hinges on the right.

If you wish to change the opening direction, follow the instruction below:

• Unplug the refrigerator from its electrical outlet.

• Empty everything in the refrigerator, including shelves, food, etc.

1. Remove the hinge cover on the right top

of the cabinet.

2. Remove the two screws (using a ratchet

tool with a 8MM socket) that hold the top

hinge to the cabinet. Keep these screws

for later use.

3. Lift the top hinge straight up to free the pin

from the socket on the top of the door.

4. Lift the door and place it on a padded

surface to prevent scratching it.

5. Remove the plug buttons from the upper

left holes as illustrated and transfer them

to the uncovered holes at the right side.

Be sure to press the plug buttons firmly

into the holes.

6. Lay the cabinet on its side down on the

floor. Remove the two screws that hold

the bottom hinge to the cabinet using a

10MM socket. Keep these screws and

washer for later use.

Plug button

Bottom hinge