Daewoo KOR-130E Operating Instructions Manual - Setting The Clock

SETTING THE CLOCK

When the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC power

ever goes off, the display shows ":0" when the power  comes back on.

9

CONTROLS

1. Touch CLOCK pad.

This is a 12 hour clock system.

2. Touch CLOCK pad once more.

This is a 24 hour clock system.

3. Enter the correct time of day by touching the numbers

in sequence.

4. Touch CLOCK pad.

5. Touch STOP/CLEAR pad.

NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will

sound. Touch the CLOCK pad and re-enter the time.

The display stops blinking, and the colon

start blinking. If you selected 12 hour clock

system, this digital clock allows you to set

from 1:00 to 12:59. If you selected 24 hour

clock system, this digital clock allows you to

set from 0:00 to 23:59.

When you touch START pad, the DEFROST indicator starts blinking to show the oven is in the

DEFROST mode. The display counts down the time to show you how much defrosting time is left in the

DEFROST mode. The oven beeps during the defrosting cycle to signal that the food needs to be turned

or rearranged. When the defrosting time ends, you will hear 3 beeps.

NOTE: This oven has multiple clock

system. If you want 12 hour clock

system, omit this step.

CLOCK

CLOCK

TIME DEFROSTING

When TIME DEFROST is selected, the automatic cycle divides the defrosting time into periods of

alternating defrost and stand times by cycling on and off.

1. Touch DEFROST pad.

2. Touch number pads for the desired defrosting time.

3. Touch START pad.

The DEFROST indicator lights and " : 0" is

displayed.

The display will show the numbers you

pressed in the order you touched.

NOTE: Your oven can be programmed for

99 minutes 99 seconds.(99:99)

DEFROST