User manual usb2.0 to ide and sata adapter cable model: da-70202.
I. Foreword congratulations on your purchase of our product! We will show you a new storage concept with safety and convenience. It is our pleasure to give you the best solution to expand your hdd's capacity and enhance your data's reliability in pc system or mac system. Before using the product, pl...
4pin power c usb2.0 power plug(red) power/activity-led (blue & red) usb2.0 plug sata plug for sata device 44-pin ide plug for 1.8/2.5 ide hdd 40-pin ide plug for 3.5/5.25 ide device note: for 3.5/5.25 ide devices, please plug in a 5v/12v power supply (not included) to appropriate port on the back si...
Sata plug led led v. Hardware installation a. Connect to a 2.5 sata hdd b. Connect to a 2.5 ide hdd for a 2.5 sata hdd or ide hdd, plug directly the sata connector or the 44pin connector into the appropriate ports on the rear of the hdd, and plug the usb signal/data plug (black) into usb port of pc....
3.5 sata hdd 5v/12v power supply (please see chapter viii. How to use power supply from your desktop computer). Alternatively, you can use 5v/12v external power supply 3.5 ide hdd 5v/12v power supply led c. Connect to a 3.5 sata hdd d . Connect to a 3.5 ide hdd for a 3.5 sata hdd or a 3.5 ide hdd, p...
E. Connect to a 5.25 ide hdd for a 5.25 cd/dvd device, plug directly the 40pin connector into the appropriate ports on the rear of the cd/dvd device, and plug the usb signal/data plug (black) into usb port of pc, then plug the 4-pin plug of the power supply to the 4-pin power jack (for ide cd/dvd di...
Vii. Under the following situation, you need to use 5v/12v power supply 1) when connects with the 3.5 / 5.25 sata devices ( hdd, cd rom , dvd rom ) 2) when this product connect with 3.5 / 5.25 ide devices ( hdd , cd rom , dvd rom ) 3) connecting with the 2.5 sata hd, when the power consumption is bi...
Viii. How to use the device with power supply from computer 1. Plug da-70202 into usb port 2. Plug 3,5hdd into the correspondent port ( sata/ide) 3. Plug the power for supplying mentioned devices in point vii . From computer.
Also, for 5,25 devices connect from the 4 pin power connector of the power supply to da-70202 (4pin dc) power supply.
Disclaimer hereby assmann electronic gmbh, declares that this device is in compliance with the requirements of directive 2014/30/eu and the directive 2011/65/eu for rohs compliance. The complete declaration of conformity can be requested by post under the below mentioned manufacturer address. Warnin...
