Summary of DA-80200
Page 1
User´s guide da-80200
Page 2: Table of Contents
2 table of contents table of contents ..............................................................................................................2 1. Overview ..........................................................................................................................3 2. Packing lis...
Page 3: 1. Overview
1. Overview (fig.1) the da-80200 wireless gps receiver (fig. 1) is a total solution gps receiver with bluetooth, uart interface and built-in rechargeable battery for high sensitivity to tracking signal. Da-80200 design is based on sirf star iii low power architecture. Da-80200 is a dual-function gps...
Page 4: 2. Packing List
2. Packing list congratulations on your purchase of the da-80200 wireless gps receiver. We hope it will be useful to you for a long time. Before you begin, make sure that your package includes the following items. If any of these items are missing, please contact your local dealer or distributor. Da...
Page 5: 3. Main Functions
5 3. Main functions da-80200 provides a series of functions. It is well suited to system integration and users who use pda, notebook pc with bluetooth device. Built in sirf star iii low power consumption chipset. 20 parallel satellite-tracking channels for fast acquisition and reacquisition. High sp...
Page 6: 4. Technical Specification
4. Technical specification 4.1. Basic specification chipset ： sirf star iii chipset . Channels ： 20 parallel satellite-tracking channels. Frequency ： 1575.42 mhz. Receiver ： l1, c/a code. 4.2. Acquisition time (averaged) reacquisition ： 0.1sec. Cold start ： warm start ： hot start ： 4.3. Receiver acc...
Page 7
4.6. Output and interface output i. Output protocol baud rate ： 38400 bps data bit ： 8 parity ： no stop bit ： 1 ii. Format. Nmea0183 v2.2 ： gpgga (1time/1 sec), gpgsa (1 time/5 sec.), gpgsv (1time /5 sec.), gprmc (1time /1 sec.), gpvtg (1 time/1 sec), (gll, or sirf binary format for optional). Iii. ...
Page 8: 5. Getting Started
5. Getting started step 1. Charge battery please charge battery till led off for the first time. Power cable plug in power cable connect to power socket ↓ charge battery battery indicator light: power too low -------- red led charging -------------- green led full or not in charging -- led of step 2...
Page 9
Gps status --- put da-80200 in clear view of the sky without any obstruction for better satellite acquiring. ↓ ↓ search gps -- power off -- ↓ position fixed -- turn on da-80200 power turn off da-80200 power steady orange led on orange led off orange led blinking 5.1. Hardware description 1). Da-8020...
Page 10
2). Led status : 10 3). Power switch : a. Power on, orange light is on. B. Power off, orange light is off. 4). External active antenna connector, see fig.3 connector type: mmcx. Active power voltage: 3.0v (fig.3) symbol color status description 1 times / 1 sec search bluetooth device 1 time / 1 sec ...
Page 11
11 table 1 pin pin name signal and description 1 gnd signal ground, battery charging ground. 2 vout unregulated voltage out: 3.6 v max 100ma. 3 txd transmit data. From organizer to peripheral.(voltage level is 3.3v ~ 5.0v). 4 rxd receive data. Form peripheral to organizer.(voltage level is 3.3v ~ 5....
Page 12: →
5.2. Software installation the following is the steps of software installation to setup on pda, dell axim with bluetooth manager. For other pda, the steps may be a little different. ( bluetooth manger is one of popular program used for bluetooth device) 1. Open “bluetooth manager” on pocket pc. New ...
Page 13: 6. Driver Installation
13 6. Driver installation you can use any da-80200 accessories data cable without installing driver except usb cable. The following is the steps of installation usb cable. 6.1 system requirement cpu: ibm, pentium, or other compatible pc. Memory: above 16 mb system: windows 98/me/2000/xp 6.2 installa...
Page 14
14 at outdoor space but gps signal is blocked by building or car roof. Go outdoor and run gpsviewer cold start function to try again, or connect an external antenna to improve the poor gps signal. Execute fail bluetooth function unstable power on/off da-80200 . Re-start pda or pc and reference sec 5...
Page 15
Federal communications commission (fcc) statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installati...
Page 16
16 note: in the event of incorrect installation and improper use in a residential area, the device may cause disruptions in radio devices and other electronic devices. Proper use means that the device is operated with shielded connector cables as far as possible, for network products also with shiel...