Digitus DC-51101-LOCAL User Manual
KVM
EXTENDER
DC-51101-LOCAL DC-51101-REMOTE
(Local) (Remote)
USER MANUAL
V1.0
Package Contents
l
KVM Extender Local Unit
x 1
l
KVM Extender Remote Unit
x 1
l
User manual
x 1
l
Power adapter DC 9V/600mA
x 2
l
3-in-1 cable
x 1
If any thing missed, please contact with your vendor.
Features
§
The extension of VGA, PS/2 keyboard, PS/2 mouse
signal up to 300 meter away by using the KVM
Extender and one CAT5 cable.
§
High VGA resolution up to 1280x1024.
§
Support Auto/Manual video quality adjustment.
§
Support video gain, equalization and RGB skew adjust.
§
Support 3 hot key to combine other equipment.
§
Two control privilege modes – “Share” & “Local only”.
§
Extra console port is available on Local side.
§
Auto console selection between Local and Remote.
-1-
Specifications
Function
DC-51101-LOCAL
DC-51101-REMOTE
PC Connector
1 x HD-15 Female
(VGA / KB / MS)
None
Monitor Connector
1 x HD-15 Female
Keyboard Connector
1 x 6 pin mini-DIN Female (PS/2)
Mouse Connector
1 x 6 pin mini-DIN Female (PS/2)
Mode Switch Button
1
None
RJ-45 Connector
1
Power
1
LEDs
Link
1
Video Resolution
1280×1024@60HZ
Cable Distance
300 m (Max.)
Power Adapter
DC 9V 600mA
Housing
Aluminum
Weight
235 g
230 g
Dimensions(LxWxH)
130x83.5x29.5 mm
Hardware Requirements
Required specifications
Console
1 x Highest resolution monitor.
1 x PS/2 mouse.
1 x PS/2 keyboard.
PC
1 x VGA, SVGA or Multisync card.
1 x 6-pin mini-DIN (PS/2) mouse port.
1 x 6-pin mini-DIN (PS/2) keyboard port.
Cable
1 x 3-in-1 KVM cable or equivalent.
DC-51101-LOCAL (LOCAL) FRONT VIEW
No
Component
Description
1
CAT.5
Connector
Plugs the CAT5 cable into this
connector.
2
Power LED
On
when the unit power on.
Off
when the unit has no power.
Flash
when “Local Using only”.
3
Link LED
On
when links successfully.
Off
when no link to Remote unit.
Flash
when Remote using.
4
Mode SW
Button
Toggle the mode switch between
“Share” & “Local only”
5
PS/2 Mouse
The PS/2 Mouse plugs here.
6
PS/2 Keyboard
The PS/2 Keyboard plugs here.
-2-
DC-51101-LOCAL (LOCAL) REAR VIEW
No
Component
Description
1
Power Jack
The power adaptor plugs here.
2
Monitor
Connector
The VGA cable (HD-15) connects
to the monitor plugs in here.
3
PC Connector
The 3-in-1 cable to PC plugs here.
DC-51101-REMOTE (REMOTE) FRONT VIEW
No
Component
Description
1
CAT.5
Connector
Plugs the CAT5 cable into this
connector.
2
Power LED
On
when the unit power on.
Off
when the unit has no power.
Flash
when “Local Using only”.
3
Link LED
On
when links successfully.
Off
when no link to Local unit.
Flash
when Local Using.
4
PS/2 Mouse
The PS/2 Mouse plugs here.
5
PS/2 Keyboard
The PS/2 Keyboard plugs here.
DC-51101-REMOTE (REMOTE) REAR VIEW
No
Component
Description
1
Power Jack
The power adaptor plugs in here.
2
Monitor
Connector
The VGA cable (HD-15) connects
to the monitor plugs in here.
*
P.S. Power and Link LED flash simultaneously when
KVM-E-PRO is in the
“command mode”
.
-3-