10/100/1000 mbps dual rj-45 network pci express adapter user manual dn-10131.
2 contents: chapter 1: introduction ............................................. 3 1.1 product introduction ........................................... 3 1.2 features ............................................................. 4 1.3 system requirements ........................................ 4 1...
3 chapter 1: introduction 1.1 product introduction pci express is the next revolution in i/o interconnect standards that will deliver the bandwidth and features required by pcs, consumer electronics and communications devices. The architecture is a cost-effective, low-pin count, and point-to-point t...
4 1.2 features designed to meet pci express specification revision 1.1 single-lane (or x1) pci express throughput supports rate of 2.5gbps fully compliant with ieee 802.3, ieee 802.3u, ieee 802.3ab 10/100/1000m data auto-negotiation jumbo frame support support wake on lan (wol) power management (opt...
5 1.4 package contents 1 x 2-port gigabit ethernet pcie card 1 x driver cd 1 x user manual 1 x low profile bracket note: contents may vary depending on country/market..
6 chapter 2: getting started 2.1 hardware layout link/activity indicator: steady green indicates good linkage between the adapter and its supporting server or switch. Flashing green indicates activity (transmitting or receiving) within the adapter 1000m/100m indicator: green: the led indicator light...
7 orange: the led indicator lights orange when a 100 mbps device is connected to the adapter 2.2 hardware installation 1. Turn off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available pcie slot. 4. To install the card, ca...
8 2.3 driver installation the following section shows you how to install 2-port gigabit ethernet pcie card driver on different operating systems. 2.3.1 installation for windows xp/vista/7 1. Insert the provided cd into your disk drive. The cd-rom will start automatically. 2. At the windows desktop c...
9 2.3.2 installation for mac os x 10.5.X/10.6.X/10.7.X 1. Insert the provided cd into your cd-rom drive. 2. Double-click the “digitus” disc icon, double-click “dn-10131” folder. 3. Double-click “mac” folder, and then double click the “for mac os x 10.4/10.5.Pkg” file (for mac os x 10.6 os, please do...
10 2.4 hardware verify 2.4.1 verifying for windows xp/vista/7 1. Click on the “device manager” tab in the windows control panel. Start > control panel > device manager 2. Entry “network adapters” item, and you can read “realtek pcie gbe family controller” in the device manager. 2.4.2 verifying for m...
11 section. 4. Scroll the list to reveal the 2-port gigabit ethernet pcie card information chapter 3: troubleshooting tips the computer can not detect the 2-port gigabit ethernet pcie card 1. Make sure that the pci express card is correctly plugged into the pci express slot; if not, turn off the com...
12 updated. 5. The board itself might be defective. You can try another motherboard testing 2-port gigabit ethernet pcie card working or not. Computer failed to start after inserting the 2-port gigabit ethernet pcie card turn off the computer, remove the 2-port gigabit ethernet pcie card, and try to...
