Digitus DN-16100-2 Quick Start Manual

Summary of DN-16100-2

  • Page 1

    H.264 multi-profile 1-channel video server quick start guide dn-16100-2.

  • Page 2: 1. System Requirements

    2 about multi-profile multi-profile stands for simultaneously video streams. These network cameras can generate h.264, mpeg4 and mjpeg streaming simultaneously to different clients. Moreover, the resolution can be different from one client to another. This state-of-art design is considerable to fit ...

  • Page 3: 2. Physical Installation

    3 2. Physical installation 2.1 connections front panel lan socket the lan socket is a rj-45 connector for connections to 10base-t or 100base-tx fast ethernet cabling. This ethernet port built n-way protocol can detect or negotiate the transmission speed of the network automatically. Please use categ...

  • Page 4: Back Panel

    4 back panel mic in (audio in) connect an external microphone to the video server. Micro sd card slot user can insert a micro sd card into this slot for recording. Factory default reset this button is hidden in the pinhole. This button is used to restore the all factory default settings. Sometimes r...

  • Page 5: 3. Camera Administration

    5 3. Plug an ethernet cable into video server connect an ethernet cable to the lan socket located on the device’s panel and attach it to the network. 4. Connect rs485 (option) when users would like to apply a camera with p/t/z function, they usually need to connect their communication port (for came...

  • Page 6

    6 view function: if ip wizard ii finds network devices, view button will be available. Please select the device you want to view and click the view button. Furthermore you could double click the left button of mouse to link to the network device by browser. 3c:49:37:07:01:02 3c:49:37:07:01:02.

  • Page 7

    7 lan setting function: the utility featured with “lan” setting function to help user to modify the ip parameters of the installed network devices. User can step by step to setup ip address, username and password. Note 1: if no ip address is assigned within 30 seconds, the networked device will auto...

  • Page 8

    8 after connected to networked device, the device will prompt for user name and password. For the first time, please enter: “admin” as username and password: “admin” to continue web management. If difficulty is met, please refer to the following steps to establish the connection: - the networked dev...