Vga over ip extender manual ds-53200
2 1. Introduction thanks for purchasing the ds-53200 vga over ip extender. We recommend that you read this manual thoroughly and retain for future reference. 1.1 features the vga over ip extenderallows you to extend video and audio up to 100 meters distance between source or computer and monitor or ...
3 2. Specifications: 2.1 general transmitter receiver console connectors vga output vga (female) vga (female) rs-232 control port phone jack phone jack pc connectors vga input vga (male) n/a extension port rj-45 full hd video / audio extension rj-45 1 (line out) 3 (1 line in & 2 line out) cascaded-c...
4 3. Connectors diagram 3.1 configuration pictures : power adapter dc 5v : audio-out port : power led (solid red when power present) : local vga monitoring : link led (solid green when link present) : vga source : ir emitter control port : audio-in port : rs232 control port : rj45 cat.5e/6 utp port ...
5 application diagram transmitter (tx) installation please use cat.5e/6 cable to get the best quality to connect to the line port (rj45) of transmitter connect the ir blaster emitter cable or rs-232 to 3.5mm adapter to the transmitter unit ir port or rs-232 port if necessary connect transmitter with...
6 receiver (rx) installation please use cat.5e/6 cable to get the best quality to connect to the line1 or line2 or line3 port (rj45) of receiver connect the ir receiver cable or rs-232 to 3.5mm adapter to the receiver unit ir port or rs-232 port if necessary connect receiver with vga cable to a vga ...
7 each receiver with three line port, one is used for source input; others are used for expanding source to other receivers. User can choose any line port as source input random and use the other two line port for expanding source to next tier receiver as long as the line port is not occupied. Netwo...
8 3.2 connection diagram (1) single source extension (2) single source extension and receivers cascade chaining (3) single source with multiple receivers cascaded vga cable.
9 cascaded and mixed with vga / hdmi / displayport ir bypass function connection connect the ir transmitter (or emitter) cable to the ir connector on the transmitter (tx) connect the ir receiver cable to the ir connector on the receiver (rx) place the ir eye of the ir receiver cable near the remote ...
10 3.3 rs-232 bypass function connection connect the device, such as a pc, projector…etc, to the rs-232 port of the transmitter or receiver via a rs-232 to 3.5mm adatper connect the controlling device to the rs-232 port of the receiver or receiver via a rs-232 to 3.5mm adapter.
