Hdmi over ip extender manual ds-55200
1. Introduction thanks for purchasing the ds-55200 hdmi over ip extender. We recommend that you read this manual thoroughly and retain for future reference. Features the hdmi over ip extender allows you to extend video and audio up to 100 meters distance between source or computer and monitor or pro...
Specification transmitter receiver hdmi output hdmi (female) hdmi (female) rs-232 control port phone jack phone jack pc connectors displayport input hdmi (male) n/a extension port rj-45 1 (line out) 3 (line in or line out) n/a up to 10 layers local power local link remote power remote link 340 g 380...
Transmitter (tx)-front transmitter (tx)-rear 1 : connected to power adapter dc 5v/2a 2 : power led (solid red when power present) 3 : link led (solid green when link present) 4 : rs-232 control port 5 : hdmi in, connected to hdmi source 6 : hdmi out, connected to display 7 : cat.5e/6 cable connected...
Applic 1-to-1 using cation d connec g network iagram ction k environ nment.
Transmitter installation • connect utp cable to transmitter, please use cat.5e/6 cable • connect the ir blaster emitter cable or rs-232 to 3.5mm adapter to the transmitter unit ir port or rs-232 control port if necessary. • connect transmitter with hdmi cable to hdmi connector of hdmi source • conne...
Casca use ut consec connec is not o as likel each r two are as sour next tie netwo the ma could b extend the mo switche single ade chai tp cable c cutively to e ct to receiv occupied, a y cascade receiver w e used for e rce input a er receiver ork switc aximum dis be extende another 1 ore networ es ...
Single single e source e source e extens e with mu ion and r ultiple re receiver eceivers rs casca cascad ade chai ed ning.
Cascaded and mixed with vga / hdmi / displayport ir bypass function connection • connect the ir transmitter (or emitter) cable to the ir connector on the displayport transmitter unit (tx) • connect the ir receiver cable to the ir connector on the displayport receiver unit (rx) • place the ir eye of ...
Rs-232 bypass function connection • connect the device, such as a pc, projector…etc, to the rs-232 port of the displayport transmitter unit or displayport receiver unit via a rs-232 to 3.5mm adatper • connect the controlling device to the rs-232 port of the hdmi receiver unit or hdmi receiver unit v...
