Hdmi video extender user manual ds-55400
１ table of contents 1.0 introduction ........................................................................... 2 2.0 specifications ....................................................................... 3 3.0 package contents ................................................................ 3 4.0 ...
２ dear customer thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1.0 introduction the extender is based on the hdbaset technology. ...
３ 2.0 specifications signal inputs/output input video signal 1.2 volts p-p output video hdmi video format supported dtv/hdtv 480i/576i/480p/576p/720p/1080i/1080p transmission distance cat5e/6 cable 100m for1080p/60hz operating frequency video amplifier bandwidth 3.4gpbs/340mhz vertical frequency ran...
４ 4.0 panel descriptions sender (1) dc/48v (2) power indicator the led will turn on once the dc/48v provided. (3) link when led is “on”, it indicates hdbaset link connection established between the sender and the receiver over the cat5e/6 cable..
５ (4) hdcp when the led is “on”, it indicates a video content with hdcp protection is being transferred. When led is “blinking”, it indicates a video content without hdcp. When led is “off”, it indicates no video connected. (5) hdbaset connect the sender to the receiver using a cat5e/6 cable. (6) ie...
６ (2) power indicator the led will turn on once the 48v power adapter provided at the end of the sender. (3) link when led is “on”, it indicates hdbaset link connection established between the sender and the receiver over the cat5e/6 cable. (4) hdcp when the led is “on”, it indicates a video content...
７ 5.0 connection and operation 1) connect the hdmi source (such as dvd, ps3, stb ) to the input of sender. 2) connect the output of receiver to hdtv display. 3) use a cat5e/6 cable up to 100m to connect the sender and receiver. 4) plug one piece of 48v/1a power supply into the sender 5) power on the...
