Digitus DS-56200 User Manual

Manual is about: DisplayPort over IP

Summary of DS-56200

  • Page 1

    Displayport over ip extender manual ds-56200 • ds-56201.

  • Page 2: 1. Introduction

    1. Introduction thanks for purchasing the ds-56200 displayport over ip extender (ds-56201 receiver only). We recommend that you read this manual thoroughly and retain for future reference. Features the displayport over ip extender allows you to extend video and audio up to 100 meters distance betwee...

  • Page 3

    Package contents ds-56200 displayport extender transmitter x 1 displayport extender receiver x 1 power adaptor dc 5v x 2 user manual x 1 ds-56201 displayport extender receiver x 1 power adaptor dc 5v x 1 user manual x 1 specification.

  • Page 4: 2. Detail and Diagram

    2. Detail and diagram detail picture.

  • Page 5

    Application diagram 1-to-1 connection transmitter installation  connect utp cable to transmitter, please use cat.5e/6 cable  connect the ir blaster emitter cable or rs-232 to 3.5mm adapter to the transmitter unit ir port or rs-232 control port if necessary.  connect transmitter with displayport c...

  • Page 6

    Receiver installation  connect utp cable to receiver, please use cat.5e/6 cable  connect the ir receiver cable or rs-232 to 3.5mm adapter to the receiver unit ir port or rs-232 port if necessary  connect receiver with displayport cable to displayport connector of monitor  plug dc 5v/2a power ada...

  • Page 7

    Cascade chain connection 1. Plug dc 5v/2a power adapter. 2. Use utp cable connected with receiver to link the other two (2) receiver units consecutively to extend another 100m distance, the cable connector node is to connect to receiver line1 or line2 or line3 port (rj45), as long as the line port i...

  • Page 8

    Cascaded and mixed with vga / hdmi / displayport.

  • Page 9

    Ir bypass function connection  connect the ir transmitter (or emitter) cable to the ir connector on the displayport transmitter unit (tx)  connect the ir receiver cable to the ir connector on the displayport receiver unit (rx)  place the ir eye of the ir receiver cable near the remote controller ...

  • Page 10

    Hub extend function connection the maximum distance between each tier could be up to 100 meters long, while this could be extended through network switch. User can add one network switch to extend another 100 meters. The more network switches, the longer distance extended. The number of network swit...