- DL manuals
- Digitus
- Security Camera
- NETWORK CAMERA
- User Manual
Digitus NETWORK CAMERA User Manual
Summary of NETWORK CAMERA
Page 1
Network camera user manual please read instructions thoroughly before operation and retain it for future reference..
Page 2
Important safeguard all lead-free products offered by the company comply with the requirements of the european law on the restriction of hazardous substances (rohs) directive, which means our manufacture processes and products are strictly “lead-free” and without the hazardous substances cited in th...
Page 3
Mpeg4 licensing this product is licensed under the mpeg4 visual patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the mpeg4 visual standard (“mpeg-4 video”) and/or (ii) decoding mpeg4 video that was encoded by a consumer engaged ...
Page 4
Table of contents 1. Overview ......................................................................................................................................... 1 1.1 product features ................................................................................................................
Page 5
1 1. Overview 1.1 product features easy network setup with your iphone / ipad onvif standard supported to simplify system integration h.R. Image sensor gives users clear and sharp pictures remote surveillance -- fully compatibility on iphone & ipad , and internet explorer® on windows® operating syst...
Page 6
2 1.5 status indicator icon lan connection status internet connection status system status during powering on always on always on reset default blinking (on 250 ms, off 250 ms) always off upgrade blinking (on 250 ms, off 250 ms) blinking (on 250 ms, off 250 ms) connection status lan connected always...
Page 7
3 2. Camera access with internet explorer this network camera can be accessed via microsoft® internet explorer® and iphone / ipad / android mobile devices with our self-developed program “eagleeyes” installed depending on different using situations. Note: for details about accessing network cameras ...
Page 8
4 function icon user level description live supervisor / power user / normal user / guest switch to the live view page. Config. Supervisor switch to the system configuration page, and the functions available for “supervisor” and “power user” are different. For details, please refer to “3.1 system co...
Page 9
5 3. Camera configurations users can further configure this network camera by accessing via internet explorer. 3.1 system configuration menu click “config.” to enter the configuration page. Note: you need to be “supervisor” to enter the system configuration page. If you’re not a “supervisor”, please...
Page 10
6 main menu sub-menu reference 3.2 network 3.2.1 network you can set the network configuration of the network camera depending on your network type. For details, please refer to “advanced network setup” from www.Surveillance-download.Com/user/n216.Swf . 3.2.2 qos qos, quality of service, is the abil...
Page 11
7 3.2.4 sntp sntp (simple network time protocol) is used to synchronize your camera time with the networked computer systems. Function description gmt once users choose the time zone, the network camera will adjust the local area time of the system automatically. Ntp server simply use the default sn...
Page 12
8 4.4.7 sms note: before using this function, you need to apply an api id from the mobile messaging company, clickatell, and you will be charged starting from the 11 th message. For details, please refer to “appendix 3 api id application for sms messaging’ at page 20. Enter the detailed information ...
Page 13
9 function description filter configuration error count set the maximum count for login failure. When the maximum count is reached, the ip address trying to access the network camera will be locked. Error lock time set the lock time in minutes when the maximum count of error login for an ip address ...
Page 14
10 when “port mapping” is set to “enable”, the system will automatically assign an ip address or port number for you if no ip address or port number is entered. Note: when the configurations are saved successfully, you’ll see a message indicating the ip address and port number assigned to this netwo...
Page 15
11 3.3 camera 3.3.1 camera rename the camera, and change the place where the camera name is shown on the screen, up-left / up-right / down-left / down-right. 3.3.2 video adjust video-related settings in different video format. “quality” is related to image clearness. “fps” is related to the fluency ...
Page 16
12 3.3.4 advance adjust the camera parameters if necessary. Item description back light it is the function to adjust the image to compensate for an area that is overpowered by brightness because of excessive light. The image will be properly exposed for clearness. Select to activate (on) or disable ...
Page 17
13 item description click “select all” to set the whole area under detection. Duration set the duration time for trigger recording (5 / 10 / 20 / 40 seconds). Action here defines how the camera delivers alerts to you for any event. Item description e-mail select the event type you want to receive e-...
Page 18
14 3.5.2 time set daylight saving time and the current time, and click “save” to confirm. Function description time configuration date set the current date. Time set the current time. Daylight saving time configuration daylight saving time specify whether to use daylight saving time (enable / disabl...
Page 19
15 3.5.4 online you can check the current online user(s) with respective online information. To refresh the list, click “reload”. To allow anonymous login, select “enable” in “anonymous viewer login”. To disable image code verification at login, select “no” in “login with captcha image”. 3.5.5 accou...
Page 20
16 3.5.6 google maps this function is used to let you know where the network camera is. The system will prompt you to apply a goole maps key if your access is denied. Please follow the instructions below when you’re denied: step1: click “sign up for a google maps key” to enter the application page. ...
Page 21
17 note: you’ll be prompted to keep current configurations. It’s recommended to keep them, or all configurations will be restored to default values after upgrade. Note: it takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware upgrade, or the upgrade may be fa...
Page 22
18 appendix 1 product specifications avn216 ▓ network network compression h.264 / mpeg4 / mjpeg multiple video streaming (encode modes, ips, resolution) 3 (h.264, mjpeg, mpeg4) lan port yes lan speed 10/100 based-t ethernet supported protocols ddns, pppoe, dhcp, ntp, sntp, tcp/ip, icmp, smtp, ftp, h...
Page 23
19 appendix 2 bit rate table for reference the data below is for reference only. The bit rates listed here may vary depending on the resolution, image quality & frame rate you choose, the complexity of your monitoring area, and how often the moving objects show in your monitoring area. Testing envir...
Page 24
20 appendix 3 api id application for sms messaging to allow the camera automatically sending a text message when an event happens, you need to apply an api id from clickatell, one mobile messaging company, first. Note: the sms messaging is not totally free. You will be charged starting from the 11 t...
Page 25
21 click the link in the email to complete account activation, and enter the login page as follows. Enter the password you set, and click “login”. Step3: enter the mobile phone number (including your country code) you want the text message to be sent, and click “send activation code”. The system wil...
Page 26
22 appendix 4 q&a for more details about eagleeyes q&a, please visit our official website: www.Eagleeyescctv.Com/supp_qna.Aspx . Question answer i can connect to this camera in my house or office where it’s installed with wireless network. But when i leave my house or office, i can’t connect to it f...