Summary of OVER CAT.5
Page 1
Usb kvm extender over cat.5 user’s manual ds-52100
Page 2: Index
- 1 - index 1 introduction ........................................................................................................................ 2 1.1 f eatures .............................................................................................................. 3 1.2 p ackage c ontents ...
Page 3: 1 Introduction
- 2 - 1 introduction thank you for purchasing the usb kvm extender over cat.5. This kvm extender allows you to extend the computer’s video and usb keyboard/mouse signal. Therefore, you now have a high quality and durability extension solution to control your system up to 200 meters away from your co...
Page 4
- 3 - 1.1 features 1. Extends the keyboard / video / mouse signal by a cat5/5e/6 cable. 2. Dual console operation - control your system from both the local and remote unit. 3. Push button at local side to select active console. 4. Available active console options: local console / remote console / bo...
Page 5
- 4 - 1.3 specifications modle name ds-51200 transmitter receiver console connectors vga output hdb-15 ( female ) hdb-15 ( female ) usb keyboard usb type a (female) usb type a (female) mouse usb type a (female) usb type a (female) pc connectors video (kb/ms) hdb-15 ( female ) (ps/2 & usb signal comb...
Page 6: 2 Installation
- 5 - 2 installation 2.1 system requirements console 1. Vga, svga, multisync monitor capable of the highest resolution. 2. Usb keyboard/mouse. Computer 1. Vga, svga or multisync card. 2. Type a usb port or ps/2 6 pin mini-din for keyboard and mouse. 3. Operating systems: windows 98/98se/2000/me/xp/2...
Page 7
- 6 - 2.2 physical diagram transmitter front view 1 reset switch 2 led indicators 3 push button 4 usb keyboard 5 usb mouse rear view 1 cat5 2 video to local monitor 3 video/kb/ms to pc 4 power jack.
Page 8
- 7 - receiver front view 1 reset switch 2 led indicators 3 usb keyboard 4 usb mouse 5 video adjusted skews rear view 1 cat5 2 upgrade 3 video to local monitor 4 power jack reset switch : press the reset switch if you want to reset the system. This switch must be pushed with a thin object like the e...
Page 9
- 8 - cable connection diagram 1 monitor 2 pc 3 video/kb/ms 4 5 usb mouse usb keyboard 2.3 hardware installation 1. Switch off all devices. 2. Connect your monitor, usb keyboard/mouse to the local unit, if you want to control your system at the local console. 3. Connect your monitor, usb keyboard/mo...
Page 10: 3 Operations
- 9 - 3 operations 3.1 active console selection by push button you can press the push button on the local unit to change the active console of operation. There are three types of active console configurations: 1. Local console only you can operate the system only from the local unit . 2. Remote cons...
Page 11
- 10 - local selected: indicates that you can control your system from the local console only. Remote selected: indicates that you can control your system from the remote console only. Active indicators (green) indicates the connection status: local indicator: indicates whether the connection betwee...
Page 12
- 11 - both consoles are selected, local active is off , remote active is on: it means that the cat5 connection between the local and remote unit is ready, but the local unit is not connected to the pc correctly or the pc is not turned on. In this case, you cannot control your system from any consol...
Page 13
- 12 - 3.4 sun micro system function key emulation: there are 16 special functions on the sun micro system keyboard, the kvm switch can emulate these function keys. Here is the mapping table for sun micro function key emulation. To activate this emulation, you have to press the left window key first...
Page 14
- 13 - disclaimer information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other com...