The zo ™ personal subwoofer user guide ®.
What’s inside introduction 1 know your zo 2 accessories 2 charge your zo 3 neutralize your audio source 4 control your zo 5 insider secrets 6 connecting to an audio source 7 connecting to a listening device 8 troubleshooting 9 warnings 10 caring for your zo 10 warranty and returns 10
Introduction the digizoid® zo™ personal subwoofer is unlike any other audio enhancement device you’ve experienced before. It’s not your con- ventional headphone amplifier, equalizer, or artificially produced 3d sound effect. Instead, the zo defines a new category of sound sys- tem – an electronic su...
Know your zo included cables 3.5 mm stereo cables these cables connect your zo to an audio source. Depending on the application, you can choose which length best fits your needs (i.E., the shorter length is ideal when you need zo on the go). Lightscale™ indicator a visual representation of the smart...
Charge your zo before first use, the zo should be fully charged connect the mini-end of the supplied usb charging cable to zo’s charging port, and the other end to your computer’s usb port. When in charging mode, the charge status indicator light will glow blue. Once zo is fully charged, the indicat...
Neutralize your audio source when initially connecting zo to an audio source, it is important to start with neutral source equalizer (eq) settings, as recom- mended below: portable media players or a computer’s music player turn off all eq settings, which are typically found in the player’s main men...
Control your zo powering on/off to turn your zo on, push in and release the svc. When on, the lightscale indicator will illuminate. To turn zo off, push in and release the svc. Adjusting the subwoofer intensity when your zo is turned on for the first time, the svc will be set at the median contour l...
Insider secrets stepwise vs. Continuous svc selections the svc can change the 32 contour levels in steps or continuous mode. When rotated briefly (less than 1 sec), contour changes by one level. When held rotated, zo activates its continuous mode, changing four levels per second. Zo’s memory zo reta...
Connecting to an audio source source with headphone output audio source zo 3.5mm stereo cable stereo source zo stereo source (i.E., computer) 3.5mm stereo cable 7 : 10
Connecting to a listening device 8 : 10 zo listening device headphones or earbuds car’s aux zo 3.5mm stereo cable car stereo with aux input zo stereo receiver male rca to 3.5mm stereo cable stereo system.
Troubleshooting if zo doesn’t turn on, ensure... The battery is charged. You are pushing the svc in all the way, and then immediately releasing it. If the battery doesn’t charge, ensure... A usb 2.0 port is being used. Your computer is not turned off or in sleep mode. Depending on how long you’ve ha...
Warnings always adjust the volume of your audio source to a safe level before putting on headphones or earbuds. Do not connect zo to a mono channeled system. Do not make repairs to the zo yourself. Do not leave the zo in your car, or any other environment where temperatures could exceed 120°f. To re...
Zo product manual ver. 1 © 2010 digizoid inc. All rights reserved. Smartvector™ and lightscale™ are patent pending technologies of digizoid inc. Zo™, smartvector™, and lightscale™ are trademarks of digizoid inc. ® ®.
